Chapter 4 Settings — [PICTURE] menuENGLISH - 77Terminal System format terminal, LINK/LAN> terminal480i, 576i, 480p, or 576psignal Select [AUTO], [RGB], or [YCBC R ].Other movie-based signals Select [AUTO], [RGB], or [YPB PR ]. terminal (Only forPT-DZ870U)Select [AUTO], [480i YCBC R ], [576i YCBC R ], [720/50p YPBPR ], [720/60p YPBPR ], [1035/60i YPBPR ],[1080/24p YPBPR ], [1080/24sF YPBPR ], [1080/25p YPB PR ], [1080/30p YPBPR ], [1080/50i YPB PR ],[1080/60i YPBPR ], [1080/50p YPBPR ], [1080/60p YPB PR ], [1080/24p RGB], [1080/24sF RGB],[1080/25p RGB], [1080/30p RGB], [1080/50i RGB], or [1080/60i RGB].4) Press the button.Notef Refer to “List of compatible signals” (x page 178) for the types of video signals that can be used with the projector.f This may not function properly for some connected external devices.sRGB-compliant videosRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical Commission).Set according to the following steps to reproduce more faithful, sRGB compliant colors.1) Set [COLOR MATCHING] to [OFF].f Refer to [COLOR MATCHING] (x page 95).2) Display the [PICTURE] menu.f Refer to “[PICTURE] menu” (x page 71).3) Press as to select [PICTURE MODE].4) Press qw to set [NATURAL].5) Press as to select [COLOR].6) Press the button on the remote control to set the factory default setting.7) Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEMDAYLIGHT VIEW] to the factory default settings.Notef sRGB is available for RGB signal input only.
