Panasonic PT-FW300NTU Operating Instructions Manual

Also see for PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens: Brochure & specs Dimensions Service manual Service manual Specifications

Contents

ENGLISH - 24Basic OperationProjecting an image1. Switch on the connected devices.Press the play button of the required device.2. Press the INPUT SELECT buttons to select therequired input method if needed. See “Switchingthe input signal” on page 26.The image will be projected on the screen.1. Open the front panel cover.2. Adjust the projected image with the lens shift lever.See “Lens shift and positioning” on page 17.3. Adjust the angle of the projector.Screw down the front leg adjusters and adjust theangle vertically.See “Front leg adjusters and throwing angle” onpage 16.4. Adjust the focus and the projected image size.Turn the focus lever and zoom lever to adjust theimage.You can confirm the adjusted effect with the TESTPATTERN in OPTION menu. See “TEST PATTERN”on page 43.Selecting the input signalNOTE:• SIGNAL SEARCH is ON as default and the signal fromthe connected devices is detected automatically. See“SIGNAL SEARCH” on page 39.Positioning the imageNOTE:• Do not touch the air exhaust port as this may causeburns or injury.• If keystone distortion occurs, see “KEYSTONE” onpage 35.• If you adjust the focus, you may need to adjust the sizeof the image by moving the zoom lever again.Focus leverZoom lever