SECURITY menuENGLISH - 45 SettingsYou can lock the MENU button function and thepassword will be asked to display the menu every time.OFF Deactivate the MENU LOCK system.ON Activate the MENU LOCK system.You can change the password for MENU LOCK systemto your original.1. Press the ENTER button.2. Enter the original password.Use F G I H to specify the location of the requiredcharacter, and press the ENTER button.3. Repeat step 2 until you finish the text line.You can enter up to 16 characters.Move the cursor to ALL DELETE and press theENTER button to delete all the entered text line.Press the DEFAULT button to delete the last enteredcharacter or indicated with the cursor in the text line.To insert a character in the entered text line, movethe cursor to the text box to select the required placeand press G then perform step 2.4. Select OK and press the ENTER button to set thepassword.J CONTROL PANELYou can disable the control panel buttons on theprojector body. Press I or H to switch the option.ENABLE Enable the control panel buttons.DISABLE Disable the control panel buttons.The confirmation screen will bedisplayed. Select OK by pressing theI, and the ENTER button.J REMOTE CONTROLLERYou can disable the remote control buttons. PressI or H to switch the option.ENABLE Enable the remote control buttons.DISABLE Disable the remote control buttons.The confirmation screen will bedisplayed. Select OK by pressing theI, and the ENTER button.MENU LOCKNOTE:• The factory default password is “AAAA”.• The factory default password is valid until you changethe password in MENU LOCK PASSWORD menu.• When the projector is initialized, the MENU LOCK willbe deactivated.MENU LOCK PASSWORDOK CANCELALL DELETEMENU LOCK PASSWORDSPACECONTROL DEVICE SETUPNOTE:• If you disable both of the control panel and remotecontrol buttons, you cannot return to the standby mode.Use this function with utmost care.• If you press a disabled button, you will be asked toperform the security password operation. Thepassword screen will disappear after 10 secondswithout any operation.NOTE:• You can enable the disabled control panel buttons byperforming the control panel button operation. Whilepressing the ENTER button, press the MENU button for2 seconds.