Panasonic PT-FW300NTU Operating Instructions Manual

Also see for PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens: Brochure & specs Dimensions Service manual Service manual Specifications

Contents

DISPLAY OPTION menuENGLISH - 39 SettingsJ SCREEN POSITIONYou can change the displaying position of themenu. When SCREEN FORMAT is set to 16:10,you can change the displaying position of themenu. Press I H to select the required option.LOW Displays the menu in the lower partof the screen.CENTER Displays the menu in the middle ofthe screen.HIGH Displays the menu in the upper partof the screen.You can switch the logo on/off that is displayed whenstarting up the projector. Press I H to select therequired option. STARTUP LOGO will be displayed for30 seconds.ON ActiveOFF DeactiveUSER Display the original textQ Editing the original textIf you select USER, you can display the 2 lines oforiginal text up to 40 characters in 1 line instead ofthe logo.1. Select USER and press ENTER.2. Select the required line to enter or edit the originaltext, and press the ENTER button.3. Enter the characters and repeat until finish the line.Use F G I H to specify the location of the requiredcharacter, and press the ENTER button.Move the cursor to ALL DELETE and press theENTER button to delete all the entered text line.Press the DEFAULT button to delete the last enteredcharacter or indicated with the cursor in the text line.To insert a character in the entered text line, movethe cursor to the text box to select the required placeand press G to select a character.4. Select OK and press the ENTER button to set theentered text in a box.Press G and edit the TEXT2 if you need to, andrepeat the step 3.You can turn off the AUTO SETUP button function forwhen the COMPUTER signal is detected.AUTO When the projector detects aCOMPUTER or DVI signal, adjustthe projected image positionautomatically for SHIFT, SIGNALSEARCH, DOT CLOCK and CLOCKPHASE.BUTTON Only when the AUTO SETUP buttonis pressed, the projected imageposition will be adjusted for DOTCLOCK and CLOCK PHASE. See“Remote control” on page 14.You can turn off the auto signal detecting system.ON Detect the input signal from theterminals and project the image.OFF DeactiveYou can choose a BLUE or BLACK screen for when theprojector is idle. Press I H to select the required option.When projecting WIDE signals, switch to ON to displaythe image in well adjusted size.AUTO Automatic detective systemOFF For 4:3 signalsON For WIDE signals(16:9, 16:10 and 15:9)You can switch the projection mode between SXGA+and SXGA for SXGA signals. Press I H to select therequired option.SXGA Smaller settingSXGA+ Larger settingSTARTUP LOGOOK CANCELALL DELETETEXT CHANGEAUTO SETUPNOTE:• Usually the recommended setting is AUTO.SIGNAL SEARCHNOTE:• SIGNAL SEARCH is not available when any inputsignal is projecting.• Usually the recommended setting is ON.BACK COLORWIDE MODESXGA MODE