14CARDPC card adapterSD memory cardUsing the SD memory card in a Windows PCThe accessory PC card adapter can be used to insert the SD memory cardinto a computer with a built-in PC (PCMCIA) card slot which is either Type IIor Type III compatible. The accessory JPEG Convertor software can then beused to edit and save images onto the card.Inserting the SD memory card##### Insert the SD memory card into the PCcard adapter as shown in theillustration at right.Push the card in until it locks into place.Make sure that it is facing the correct way.Note:B If the SD memory card is inserted into a computer using the PC cardadapter while the write-protect switch is at the LOCK position, a bluewarning screen will be displayed when the computer attempts to accessthe card. If this happens, press any key on the computer's keyboard toclear the error display. Check that the write-protect switch is not at theLOCK position when using the SD memory card in a computer.$$$$$ Insert the PC card adapter into the PC card slot of the computer.%%%%% If using the SD memory card for the firsttime on a computer running Windows, theAdd New Hardware Wizard will start. ClickNext.Note:B When using the SD memory card for thesecond time onwards, the following settingsteps are not necessary.&&&&& Select "Display a list of all drivers in aspecific location, so you can select thedriver you want." and then click Next.((((( Select "Standard IDE/ESDI Hard DiskController" and then click Next.Follow the prompts which appear on thescreen to continue with the installation. Lastly,click End to finish.