7Notes on handling the SD memory cardBe sure to read the following beforeusing the accessory SD memorycard.Notes on handlingBe sure to observe the following.B Do not disassemble or modifythe card.B Do not subject the card tostrong shocks, and do not twistit, bend it, drop it, step on it orimmerse it in liquids.B Do not rub the card with cloth or plastic, or bring it close to objects whichmay generate static charges or magnetic fields.B Do not touch the metal terminals with hands or metal objects, attachstickers to them, or allow them to become contaminated in any way.B Do not remove the attached label from the card.B Do not attach any other labels or stickers to the card.Notes on storageAfter removing the SD memory card from the projector or other device,always insert it into its protective case.B Do no leave the card inside hot vehicles or in other places with hightemperatures such as places exposed to direct sunlight.B Do not leave the card in places which are exposed to substances such ascorrosive gases.Protecting valuable dataB Do not turn off the projector power supply or remove the SD memory cardfrom the projector while the card is being accessed for reading or writing(while the SD memory card access indicator inside the card slot cover atthe rear of the projector is flashing). Failure to observe this may result inloss of data.B Always make a backup of the data which is stored in the SD memory card.Accidental mistakes in using the card may sometimes result in the loss ofvaluable data.16MBLOCKFront RearWrite-protect switch