Panasonic PT-L701SDE Operating Instructions Manual

Contents

Panasonic PT-L701SDE Operating Instructions Manual Manual pdf 15 page image

15))))) Open My Computer on the Desktop, andcheck that the icon for the new driveappears.The drive icon is the same icon as that usedfor hard disks, but you can check which icon iswhich by looking at the disk capacity (14.1 MBfor a 16-MB SD memory card). (The drive letterwill appear as D:, E:, F: or something similar,depending on the computer you are using.) Ifthe drive capacity does not appear as shown inthe illustration at right, select the drive icon,and then press [ALT] + [ENTER] to display theProperties dialog box in order to check thecapacity.Note:B The screens shown for each of the installation steps are Windows 98screens. The appearances of these screens will vary depending on whichversion of Windows you are using. If you are prompted to select a driver atthe New Hardware screen, select Standard Windows driver and then clickOK. Refer to the Windows online help for further details.B Operations such as deleting, copying or renaming files and creating ordeleting folders (directories) can be carried out in the same way as for anormal hard disk. For details, refer to the documentation and help files forthe operating system being used.B The projector can only handle DCF-compliant directories and files. If thedirectories and files on the SD memory card are not DCF-compliant, theprojector will not be able to recognise them. For further details, refer topage 19.Removing the SD memory cardFollow the procedure below to remove the SD memory card.##### Close all applications software which is using the SD memory card.$$$$$ Left-click the PC Card icon ( ) in the taskbar at the bottom-right ofthe screen.Note:B If the PC Card icon does not appear in the taskbar at the bottom-right ofthe screen, click Start, point to Settings, click Control Panel and then openPC Card. Click the Show control on taskbar check box and then click OK.SD memory card driveicon