Panasonic PT-LB51SU Operating Instructions Manual

Also see for PT-LB51EA: Brochure & specs Service manual

Contents

Panasonic PT-LB51SU Operating Instructions Manual Manual pdf 21 page image

Basic OperationSwitching the projector on/offENGLISH - 211. Plug the Power cord into the projector.The POWER indicator lights up in RED.2. Press the POWER button.The POWER indicator lights up in GREEN after flashing for a while.The STARTUP LOGO is displayed on the screen. See “STARTUP LOGO” on page 34.1. Press the POWER button.The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without anyoperation.To return to the projection, press any button except the POWER button.2. Press the POWER button.The POWER indicator lights up in ORANGE while cooling the lamp, then illuminates RED.3. Once the POWER indicator is lit red, unplug the Power cord from the projector.If you are in a hurry, you can also use the direct power off function while unplugging the Power cord from the projector.(page 20)Switching on the projectorNOTE:• Some small rattling or tinkling sound may be heard when starting up, but this is normal and does not affect theperformance of the projector.• If you disconnected the Power cord while on projecting mode, the projection will start with connecting the Power cord.See “DIRECT POWER ON” on page 35.Switching off the projectorNOTE:• Press the POWER twice or for a long duration to switch the power off.• You can disconnect the Power cord instead of following this procedure. See “DIRECT POWER ON” on page 35.• You can turn off the projector by pressing the POWER button longer than 0.5 seconds.(2)POWER buttonPOWER indicator(1)(2)POWER buttonPOWER indicator