Panasonic PT-LB51SU Operating Instructions Manual

Also see for PT-LB51EA: Brochure & specs Service manual

Contents

Panasonic PT-LB51SU Operating Instructions Manual Manual pdf 23 page image

ENGLISH - 23 Basic OperationRemote control operationYou can operate the projector with the Remote controlwithin the remote range 15 m (49'2").Q Facing to the projectorEnsure the Remote control emitter is facing tothe Remote control signal receptor on front ofthe projector and press the required buttons tooperate.Q Facing to the screenEnsure the Remote control emitter is facing tothe screen and press the required buttons tooperate the projector. The signal will be reflectedoff the screen. The operating range may differ dueto the screen material. This function may not beeffective with a translucent screen.You can adjust the setting of the imageposition, DOT CLOCK and CLOCK PHASEautomatically for the projected COMPUTERsignal image.Operating rangeAUTOSETUPINPUTSELECTCOMPUTER WIRELESS VIDEOWIRELESSPRESENTATION PAGEMENUENTERFREEZE SHUTTERCOMPUTERSEARCHDEFAULT INDEX-WINDOWMULTI-LIVEDIGITAL ZOOM VOLUMERETURNNOTE:• Do not let strong light shine onto the signal receptor.The Remote control may malfunction under stronglight such as fluorescent.• If there are any obstacles between the Remote controland the Remote control signal receptor, the Remotecontrol may not operate correctly.Setting up the image position automaticallyNOTE:• SIGNAL SEARCH will be adjusted only when theSIGNAL SEARCH is set to ON.• If the dot clock frequency is 100 MHz or higher, AUTOSETUP is not effective.• If the projected image is dark or blurred around theedge, AUTO SETUP may stop the processing beforecomplete. Project a much clearer or lighter image andpress the AUTO SETUP button again.• When FUNCTION BUTTON is set to "AUTO SETUP"(see “FUNCTION BUTTON” on page 34), the AUTOSETUP operation can also be carried out by pressingthe FUNCTION button at the front of the projector.Screen Projected image