Panasonic PT-LB51SU Operating Instructions Manual

Also see for PT-LB51EA: Brochure & specs Service manual

Contents

Panasonic PT-LB51SU Operating Instructions Manual Manual pdf 31 page image

PICTURE menuENGLISH - 31 SettingsYou can keep the projected image bright and vivid evenin well-lit rooms where the ambient light sources cannotbe controlled, such as when a door opens or whenwindow coverings fail to block out sunlight.AUTO: Automatic adjustmentOFF: DeactiveThe lamp is controlled according to the input signals toproject images with the best quality.ON: ActiveOFF: DeactiveYou can perform more detailed image adjustmentmanually.J For RGB signalsQ WHITE BALANCEYou can adjust the white balance more properly in3 colors temperature by pressing I H.WHITE BALANCE REDWHITE BALANCE GREENWHITE BALANCE BLUEJ For S-VIDEO/VIDEO signalsQ TV-SYSTEMWhen the video signal is changed, the settingswitches automatically. You can switch the settingmanually to match the video data. Press I H tocycle through the options.Q STILL MODEYou can reduce the vertical flicker when projectinga still image.OFF: DeactiveON: ActiveQ NOISE REDUCTIONYou can switch the automatic noise reductionsystem on/off. Press I H to select the requiredsetting.ON: Automatic noise reductionOFF: No noise reductionDAYLIGHT VIEWNOTE:• Do not cover the Luminance Sensor of the projector.See “Luminance Sensor” on page 12.• AUTO is not available when INSTALLATION setting inOPTION menu is set to REAR/DESK or REAR/CEILING.AINOTE:• “AI” is disabled when “LAMP POWER” is set to “ECO-MODE”. See “LAMP POWER” on page 34.DETAILED SETUPNOTE:• AUTO setting will select from NTSC/NTSC 4.43/PAL/PAL60/PAL-M/PAL-N/SECAM.NOTE:• Set to OFF when projecting a moving image.NOTE:• Applying noise reduction may affect image quality.NTSCNTSC 4.43PALAUTOSECAMPAL-NPAL-M