ImportantInformationENGLISH - 6Precautions with regard to safetyIf you notice smoke, strange smells or noise comingfrom the projector, disconnect the power cord plugfrom the wall outlet.Do not continue to use the projector in such cases,otherwise fire or electric shocks could result.Check that no more smoke is coming out, and thencontact an Authorised Service Center for repairs.Do not attempt to repair the projector yourself, as thiscan be dangerous.Do not install this projector in a place which is notstrong enough to take the full weight of theprojector.If the installation location is not strong enough, it mayfall down or tip over, and severe injury or damagecould result.Installation work (such as ceiling suspension)should only be carried out by a qualified technician.If installation is not carried out correctly, there is thedanger that injury or electric shocks may occur.Do not use other than an authorised ceiling mountbracket.If foreign objects or water get inside the projector, or ifthe projector is dropped or the cabinet is broken,disconnect the power cord plug from the wall outlet.Continued use of the projector in this condition mayresult in fire or electric shocks.Contact an Authorised Service Center for repairs.Do not overload the wall outlet.If the power supply is overloaded (for example, byusing too many adapters), overheating may occurand fire may result.Never attempt to modify or disassemble theprojector.High voltages can cause fire or electric shocks.For any inspection, adjustment and repair work,please contact an Authorised Service Center.Clean the power cord plug regularly to prevent itfrom becoming covered in dust.If dust builds up on the power cord plug, the resultinghumidity can damage the insulation, which couldresult in fire. Pull the power cord plug out from thewall outlet and wipe it with a dry cloth.If not using the projector for an extended period oftime, pull the power cord plug out from the wall outlet.Do not handle the power cord plug with wet hands.Failure to observe this may result in electric shocks.Insert the power cord plug securely into the walloutlet.If the plug is not inserted correctly, electric shocks oroverheating could result.Do not use plugs which are damaged or wall outletwhich are coming loose from the wall.Do not place the projector on top of surfaces whichare unstable.If the projector is placed on top of a surface which issloped or unstable, it may fall down or tip over, andinjury or damage could result.Do not place the projector into water or let it becomewet.Failure to observe this may result in fire or electricshocks.Do not do anything that might damage the powercord or the power cord plug.Do not damage the power cord, make anymodifications to it, place it near any hot objects, bendit excessively, twist it, pull it, place heavy objects ontop of it or wrap it into a bundle.If the power cord is used while damaged, electricshocks, short-circuits or fire may result.Ask an Authorised Service Center to carry out anyrepairs to the power cord that might be necessary.Do not place the projector on soft materials such ascarpets or sponge mats.Doing so may cause the projector to overheat, whichcan cause burns, fire or damage to the projector.Do not place liquid containers on top of the projector.If water spills onto the projector or gets inside it, fireor electric shocks could result.If any water gets inside the projector, contact anAuthorised Service Center.Do not insert any foreign objects into the projector.Do not insert any metal objects or flammable objectsinto the projector or drop them onto the projector, asdoing so can result in fire or electric shocks.Do not allow the + and - terminals of the batteries tocome into contact with metallic objects such asnecklaces or hairpins.Failure to observe this may cause the batteries toleak, overheat, explode or catch fire.Store the batteries in a plastic bag and keep themaway from metallic objects.Do not touch the leaked liquid from the batteries.If you touch the leaked liquid, it may hurt your skin.Immediately wash away the liquid with water andseek medical advice.If you get the leaked liquid in your eye, it may causeblindness or damage. Never rub your eye, andimmediately wash away the liquid with water andseek medical advice.During a thunderstorm, do not touch the projector orthe cable.Electric shocks can result.Do not use the projector in a bath or shower.Fire or electric shocks can result.WARNINGS