Panasonic PTAE2000U-EC Operating Instructions Manual

Contents

ENGLISH - 19 Basic OperationSwitching the projector on/offJ Connecting1. Make sure the shape ofthe power plug and theAC IN connector on theback of the projectormatch, then push the plug all the way in.2. Connect the power cord to a wall outlet.J Disconnecting1. Make sure the MAIN POWER is switched off andunplug the power cord from the wall outlet.2. Hold the plug and unplug the power cord from theAC IN connector on the side of the projector.Power cordNOTE:• Do not use other than the provided power cord.• Ensure all the input devices are connected and turned off before connecting the power cord.• Do not force the connector as this may damage the projector and/or the power cord.• Dirt or dust build-up around plugs may cause fire or electrical hazards.• Switch off the power to the projector when not in use.POWER indicatorIndicator status StatusNo illumination or flashing The MAIN POWER button is switched off.Red Lit The MAIN POWER button is switched on and the projector is in standby.GreenFlashing The POWER button is switched on and the projector is getting ready to project.Lit The projector is ready to project.OrangeLit The POWER button is switched off and the projector is cooling the lamp.Flashing The POWER button is switched on again when cooling the lamp and recovering toprojection mode. Recovery may take a while.NOTE:• While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the power cord.• The electric consumption in standby mode is 0.08 W.POWER indicator