Panasonic PTAE2000U-EC Operating Instructions Manual

Contents

Basic OperationRemote control operationENGLISH - 23You can switch the input method manuallyby pressing the INPUT button. Press thebutton several times or press I H to cyclethrough the input methods as follows. Theactual projected image will be changed in awhile.The graphical guidance will be displayed on the upperright of the projected image and you can confirm theselected input method which is highlighted in yellow. See“INPUT GUIDE” on page 40.The aspect ratio will be selectedautomatically, or you can switch it manuallyby pressing the ASPECT button. Press thebutton several times to cycle through thedifferent aspect type as follows. See“ASPECT” on page 36.Q VIDEO/S-VIDEO/COMPONENT (YPB PR)Q COMPUTER (RGB)Q HDMIYou can access saved settings instantly.See “MEMORY LOAD” on page 34.1. Select the required setting from MEMORY1 - 16.Undefined setting will not be displayed.2. Press ENTER to activate the selected setting.Switching the input signalCOMPONENT 1 IN COMPONENT 2 INCOMPUTER IN S-VIDEO INHDMI 3 IN VIDEO INHDMI 2 IN HDMI 1 INCOMPONENT 1 IN COMPONENT (YPB PR) signalsfrom the equipment connected toCOMPONENT IN 1/COMPONENT IN 2.COMPONENT 2 INS-VIDEO IN S-VIDEO signal from the equipmentconnected to S-VIDEO IN.VIDEO IN VIDEO signal from the equipmentconnected to VIDEO IN.HDMI 1 IN HDMI signal from the equipmentconnected to HDMI IN 1/HDMI IN 2/HDMI IN 3.HDMI 2 INHDMI 3 INCOMPUTER INCOMPUTER (RGB) signal from theequipment connected toCOMPUTER IN.NOTE:• If you select an unplugged input method, the guidance will blink on and off several times.• See “List of compatible signals” on page 47.• See “Connections” on page 18.Switching the aspect ratio4:3 JUST16:9 ZOOM214:9 ZOOM14:3 16:94:3 16:9NOTE:• If you project an image with an unmatched aspect ratio,the image may distort or some portions may becropped. Select an aspect ratio which preserves theintention of the image creator.• The order of aspect type is defined not only by the inputmethod but also by the input signals. See “List ofcompatible signals” on page 47.• If you project a copyrighted image enlarged or distortedby using ASPECT function in commercial use in apublic place, such as a restaurant or hotel, you mightinfringe on the copyright of the creator which isprotected by copyright law.Loading a saved settingNOTE:• If you have not saved any settings, MEMORY1 - 16will not be displayed.