Panasonic PTAE2000U-EC Operating Instructions Manual

Contents

SettingsPICTURE menu32 - ENGLISHYou can adjust the white balance of the projected image.Setting range: -6 to +6You can switch automatic adjustment of the lamp andthe lens iris on/off.ON: Automatic adjustmentOFF: No adjustmentYou can monitor whether or not the luminance level ofthe input signal is in the recommended range bydisplaying it in the waveform monitor. If the waveform isnot in the range, adjust it for the best quality. See“Adjusting the signal condition with a waveform” onpage 24.1. Press F G to move to the required waveformstyle.2. Press ENTER to select.The WAVEFORM MONITOR will be displayed.See “Adjusting the signal condition with a waveform”on page 24.J MONITOR POSITIONWhen the FULL SCAN is selected, press F G IH to adjust the position of the monitor.See “Adjusting the signal condition with a waveform”on page 24.J AUTO ADJUSTYou can switch on/off the automatic adjustmentsystem in each items.1. Press F G and select the required item.2. Press I H and switch on/off.3. Press F G and select AUTO and press ENTER.The confirmation screen will be displayed.4. Press I H and select OK.5. Press ENTER.You can perform image adjustment in some PICTUREmenu items while displaying a certain area of the frozenimage in a split window.Q SPLIT ADJUST MODESelect the required split style from NORMAL andREVERSE in the SPLIT ADJUST MODE menu.NORMALREVERSECOLOR TEMPERATUREDYNAMIC IRISWAVEFORM MONITORMorebluishLessbluishOFFFULL SCAN(Y)FULL SCAN(R)FULL SCAN(G)FULL SCAN(B)SINGLE LINE SCAN(Y)SINGLE LINE SCAN(R)SINGLE LINE SCAN(G)SINGLE LINE SCAN(B)MONITOR POSITION UPPER LEFTAUTO ADJUSTItems Default settingBLACK LEVEL ADJUST ONWHITE LEVEL ADJUST ONRGB ADJUST (BLACK) OFFRGB ADJUST (WHITE) OFFNOTE:• When the WAVEFORM MONITOR is set to OFF, theAUTO ADJUST is not displayed.SPLIT ADJUST