Precautions with regard to safetyENGLISH - 7 ImportantInformationDo not use the projector in a bath or shower.Fire or electric shocks can result.Do not place your skin into the light beam while theprojector is being used.Strong light is emitted from the projector’s lens. If youplace directly into this light, it can hurt or damageyour skin.Do not look into the lens while the projector is beingused.Strong light is emitted from the projector’s lens. If youlook directly into this light, it can hurt and damageyour eyes.Be especially careful not to let young children lookinto the lens. In addition, turn off the power anddisconnect the power plug when you are away fromthe projector.Do not place your hands or other objects close to theair outlet port.Heated air comes out of the air outlet port. Do notplace your hands or face, or objects which cannotwithstand heat close to this port [allow at least50 cm (20") of space], otherwise burns or damagecould result.Replacement of the lamp is recommended to becarried out by a qualified technician.The lamp has high internal pressure. If improperlyhandled, explosion might result.The lamp can easily become damaged if struckagainst hard objects or dropped, and injury ormalfunctions may result.When replacing the lamp, allow it to cool for at leastone hour before handling it.The lamp cover gets very hot, and touching it cancause burns.Before replacing the lamp, be sure to disconnect thepower plug from the wall outlet.Electric shocks or explosions can result if this is notdone.Do not allow infants or pets to touch the remotecontrol unit.The accessory remote control unit can be used tooperate not only the projector but also otherappliances such as air conditioners and electricaldevice by programming them using the learningfunction. If the remote control unit operatedinappropriately, fire or injury may result.Keep the remote control unit out of the reach ofinfants and pets after using it.