56With a PCInstallation of MotionDV STUDIO1 Insert the supplied CD-ROM into thepersonal computer’s CD-ROM drive.• Quit all applications.• The [Setup Menu] screen appears.2 Click the [MotionDV STUDIO].Using MotionDV STUDIO(PV-GS35 Only)When the OS is Windows XP/2000/Me, theCamcorder can be connected to the personalcomputer with the DV Cable.When the OS is Windows XP/2000, the Camcordercan be connected to the personal computer with theUSB Cable, however, Video Stream Driver must beinstalled.• Do not connect the USB Cable until the VideoStream Driver is installed.Operating environmentOS:IBM PC/AT compatible personal computer withpre-installed:Microsoft Windows XP Home Edition/ProfessionalSP1 or laterMicrosoft Windows 2000 Professional SP4 or laterMicrosoft Windows Me (Millennium Edition)(Only in DV connection)CPU:Intel Pentium III 700 MHz or higher/AMD Athlon 1 GHzor higher (including compatible CPU)Graphic display:High Colour (16 bit) or more(32 bit or more recommended)Desktop resolution of 1 024 × 768 pixels or more(Supporting the overlay of DirectDraw)4 MB or more video memorySound:PCM sound source (Compatible Direct Sound)RAM:256 MB or more(Adding more memory enables you to operate thepersonal computer more comfortably.)Hard disk:Ultra DMA – 33 or moreFree hard disk space:640 MB(When you capture video, 1 GB is needed for data ofapprox. 4 minutes.)Interface:DV (IEEE1394) terminal (IEEE1394.a)USB 2.0 (Hi-Speed compliant)DirectX 9.0b or laterWindows Media Player 6.4 or laterOther requirements:MouseInstalling Video Stream DriverInstall this when your OS is Windows XP SP1 orlater, or Windows 2000 SP4 or later. (When your OSis Windows XP SP2 or later, installing Video StreamDriver is not needed.) Video Stream Driver must beinstalled when you connect the Camcorder to the PCwith the USB Cable and use MotionDV STUDIO.DirectX 9.0b is installed in your PC if it is not installedbeforehand.• When DirectX 9.0b is installed, applicationssupported by previous versions of DirectX may notrun. In this case, consult the manufacturers of theapplications disabled.1 Insert the CD-ROM into the personalcomputer’s CD-ROM drive.• Quit all applications.• The [Setup Menu] screen appears.2 Click [Video Stream Driver].• The set up program starts running.3 For Windows XP users:Depending on your system environment,installation of “DirectX 9.0b” may berequired. Click [Yes] and continue withinstallation.• After “DirectX 9.0b” is installed, the computerwill restart.• Do not remove the CD-ROM.• Installation may take a little while.4 Finish installation by following theon-screen instructions.• Click [Next] and proceed with installation.• After completing the installation, Click [Finish].5 After the Video Stream Driver is installed,please restart your computer.