Panasonic PV-GS19 Operating Instructions Manual

Also see for Digital Paimcorder MultiCam PV-GS19: Operating instructions Operating instructions Operating instructions

Contents

69OthersChoosing Sound during PlaybackYou can select the sound by using the [ AUDIOOUT] setting on the [ SETUP] Sub-Menu.STEREO: Stereo Sound (main sound and subsound)L: Left channel sound (main sound)R: Right channel sound (sub sound)• If you dub a tape recorded at the [12bit] selectedas the [ AUDIO REC] on the [ SETUP]Sub-Menu, playback sound becomes stereosound regardless of the [ AUDIO OUT] setting if[ 12bit AUDIO] is set to [MIX]. Playing Back a Card• While the data on a card is playing back, do notoperate the Mode Dial.• If a blank (nothing recorded) Card is played, thescreen becomes white.• If you attempt to play back file recorded in a differentformat or file data is defective, the whole displaybecomes bluish and the [UNPLAYABLE CARD]Indication may appear as a warning.• When the Access Lamp is lit, do not insert or removea card.• When playing back a picture recorded on otherequipment, its size and that of this Camcorder mayappear differently.• It takes time to display the file depending on thenumber of pixels of the file.• When playing back a file recorded on otherequipment, the date and time display is differentfrom when it was recorded.• When playing back a picture recorded on otherequipment, the picture may not be played back orthe quality of pictures may be deteriorated.• When playing back a non standardized file, theFolder File Number may not be displayed. Slide Show• Playback time may take longer than usual dependingon the picture. Deleting the Files Recorded on a Card• When [CARD FULL] is shown during recording,switch to the Picture Playback Mode and then deleteunnecessary files.• If there are no files to delete, insert a new card.• If files conforming to DCF standard are deleted, allthe data related to the files will be deleted. DPOF• DPOF setting made on another camera may notbe recognised by Camcorder. Perform the DPOFSettings on your Camcorder.• Verifying the DPOF Settings may take a little time.Wait until the Card Access Lamp goes out. Lock Setting• The Lock Setting carried out by this Camcorder isonly effective for this Camcorder.• The SD Memory Card has a write protection switchon it. If the switch is moved to the [LOCK] side, youcannot write to or format the Card. If it is movedback, you can. Playing Back on Your TV• Whenever plugging in the S-Video cable, plug in theAV cable, too.• Use the AC adaptor to avoid battery depletion. Recording from a Tape onto a Card• If you press the [PHOTO SHOT] Button withoutpausing, blurred pictures may be recorded. Audio Dubbing• The blank section of a tape cannot be dubbed.• Sounds sent through the DV terminal cannot bedubbed.• If a tape has a non-recorded portion when the tapeis dubbed, images and sounds may be disturbedwhen this portion of the tape is played back.• In the case of importing data recorded with AudioDubbing to a PC using the PC’s software, only theoriginal sound (ST1) may be imported, depending onthe software. Using the DV Cable for Recording(Digital Dubbing)• Do not plug or unplug the DV Cable during dubbing,or the dubbing may not be completed properly.• Regardless of the menu settings on the recorder,digital dubbing is carried out in the same mode asthe [AUDIO REC] mode of the playback tape.• The images on the recorder monitor may bedisturbed, but it does not affect the recorded images.• Even if you use a device equipped with DVTerminals such as IEEE1394, you may not be ableto perform Digital Dubbing in some cases. For moreinformation, see the instructions for equipmentconnected.• Date or other information to be displayed cannot bedisplayed if the software of the connected equipmentdoes not support the display function.