Recording Mode-34-Manual Shutter Speed AdjustmentUseful for recording fast-moving subjects.1 Set the [AUTO/MANUAL/FOCUS] Switch(48)to [MANUAL].≥The [MNL] Indication appears.2 Press the [ENTER] Button (14)until theShutter Speed Indication appears.3 Press the [5] Button (13)or [6] Button(16)to adjust the shutter speed.Range of Shutter Speed Adjustment1/60–1/8000 s in Tape Recording Mode1/60–1/500 s in Card Recording ModeThe standard shutter speed is 1/60 s.Selecting a speed closer to [1/8000] causes theshutter speed to be faster.To Resume Automatic AdjustmentSet the [AUTO/MANUAL/FOCUS] Switch to[AUTO].≥For other notes concerning this item, see -66-.Manual Iris Adjustment(F Number)You can use this function when the screen is toobright or too dark.1 Set the [AUTO/MANUAL/FOCUS] Switch(48)to [MANUAL].≥The [MNL] Indication appears.2 Press the [ENTER] Button (14)until the IrisIndication appears.3 Press the [5] Button (13)or [6] Button(16)to adjust the iris.Range of Iris AdjustmentCLOSE (Closed), F16, ..., F2.0,AUTOMANUALFOCUS(48)MNL1/1000STILLENTERFADEis(14)AUTOMANUALFOCUS(48)MNL1/60F2.0STILLENTERFADEis(14)OP (Opened)i0dB, ..., OPi18dBWhen a value closer to [CLOSE] is selected, theimage becomes darker.When a value closer to [OPi18dB] is selected,the image becomes brighter.The value to which idB is attached indicates aGain-up value. If this value is too large, the qualityof the image deteriorates.To Resume Automatic AdjustmentSet the [AUTO/MANUAL/FOCUS] Switch to[AUTO].≥For other notes concerning this item, see -66-.Manual Focus AdjustmentFocus can be adjusted manually for recording ina situation where auto focus may not functionwell.1 Set the [AUTO/MANUAL/FOCUS] Switch(48)to [MANUAL].≥The [MNL] Indication appears.2 Slide the [AUTO/MANUAL/FOCUS] Switch(48)to [FOCUS].≥The [1MF] Indication (Manual Focus Mode)appears.3 Press the [5] Button (13)or [6] Button(16)to adjust the focus.≥If you keep pressing the [5] Button or [6]Button, the speed of adjusting will be faster.To Resume Automatic AdjustmentSet the [AUTO/MANUAL/FOCUS] Switch to[AUTO] or [FOCUS].AUTOMANUALFOCUS(48)AUTOMANUALFOCUS(48)MFMNLSTILLENTERFADEis(16) (13)