Panasonic PV-V464S Operating Instructions Manual

Also see for PV-V464S: Service manual Operating instructions

Contents

Location ofFront View of the V*Important: If a rempress thTimer Recording1 Press PROG* to display program screen.Press PROG to end programming.23) Set remaining items,press to set START/ STOP times, CH (channel) orLINE input (p. 9 of Advanced Operations book), andtape speed (p. 3).Then press to select.1) Press .2) Set record DATE,press to select:1~31= one time,or DAILY= Monday~Friday,or WEEKLY= same timeeach week (see right).3 To Enter More ProgramsPress to select and press to set an unused program.Then repeat step 2. Or, press PROG to exit.Timer RecordingExampleTodayPress to selectdesired program.4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)(Recording is not in progress)a Press PROGto display program screen.bc To Replace program...d Press PROG to end the programming.• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must be set to theCable Box output channel and your Cable Box must be manually set to the desired channel.The Cable Box must be left on.• If a power interruption occurs while programming the timer, the timer program(s) may be canceled.If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen,please re-enter the timer programs.Important notes when using DSS receiver• When recording programs via DSS receiver, DSS receiver must be left on.• When recording programs via an antenna or cable, DSS receiver must be turned off.Review, Replace, or Clear Program1) Press to display.2) Repeat Step 2(above) to set newprograms.Press ADD/DLT.orTo Clear program...Press POWER and then STOP within 10seconds to cancel the Timer Recording.(The TIMER indicator goes out on Multi FunctionDisplay.)Cancel a Timer Recording(Recording is in progress)- 6 -NotesDAILY72131 68 9SELECT / Selection OrderWEEKLY(SA) WEEKLY(MO) WEEKLY(SU)P DT STAR T STO P CH SPD1 13 2: 00p 3: 20p 02 SLP2 14 7: 00p 7: 30p 10 SP3 -- -- :-- --: -- -- --4 -- -- :-- --: -- -- --SELECT : SET :EXIT : PROGP DT STAR T STO P CH SPD1 13 2: 00p 3: 20p 02 SLP2 -- --: -- --: -- -- --3 -- --: -- --: -- -- --4 -- --: -- --: -- -- --CANCEL : ADD/DLTSELECT : SET :END : PROGSET COMPLETEDP DT STAR T STO P CH SPD1 -- -- : -- -- :-- -- --2 -- --: -- --: -- -- --3 -- --: -- --: -- -- --4 -- --: -- --: -- -- --SELECT : SET :END : PROGP DT STAR T STO P CH SPD1 -- -- : -- -- :-- -- --2 14 7: 00p 7: 30p 10 SP3 -- -- :-- --: -- -- --4 -- -- :-- --: -- -- --SELECT : SET :END : PROGipped with HQcompatible with. Only use tapestapes tested and, 6, and 8 hournded.d,n again.rd tab (p. 3).).R keysr 100, first press 100s.9 of “Advancedrd speed (p. 3).ing.LOW to pause, andg.rding.et length as follows:2:00 ➛ 3:00ngth set.tch anotherunction Display),(recording continues).Rause mode.ction Display),.d recordinghen using Cableode, VCR stops toeo heads.“ VCR” lights on.10 of Advancedt to “ OFF,” presshts on the MultiP DT STAR T STO P CH SPD1 13 2: 00p 3: 20p 02 SLP2 14 7: 00p 7: 30p 10 SP3 -- --: -- --: -- -- --4 -- --: -- --: -- -- --CANCEL : ADD/DLTSELECT : SET :END : PROGPAUSE/SLOW(Displays still, frame by fraor slow motion picture)POWER(Turns VCR off/on)Remote Control ButtACTION(Displays menu)VOLUME + / -(Adjusts TV volume)SAP/Hi-Fi(Selects audio mode for por record)EJECT(Ejects tape)SPEED(Changes tape speed)RECORD(Records a program, etcRemote ControlEJECT button: PresINPUT(For LINE or channel)NUMBER Keys(Selects channel directlyADD/DELETE(Adds or deletes a channCOMMERCIAL SKIP/ZERO SEARCH(Starts COMMERCIAL SZero Search)PROGRAM(Displays Timer Program• Connections • Initial Setup • Clock Set • Select Channel • Playback • Record • Auto OperationPOWERCHATRAVideoInputConnectorAudio InputConnector(L/R)