Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual

Also see for Palmcorder MultiCam PV-DV852: Service manual

Contents

Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual Manual pdf 19 page image

191, 21, 3MENUPUSHW.B./SHUTTER/IRIS/VOL/JOGCLOCK-SETPUSH MENU TO RETURNYEAR :2002MONTH :OCTDAY :10HOUR : 2PMMINUTE:301CAMERA FUNCTIONSPUSH MENU TO EXIT1.CAMERA SETUP2.DIGITAL EFFECT3.CARD SETUP4.MULTI-PICTURES5.RECORDING SETUP6.DISPLAY SETUP7.OTHER FUNCTIONS12AUDIO-RECREC-SPEEDAUDIO-REC 12bitRETURN ---- YESSP LPINDEX 2HOURWIND-CUT OFFRECORDING SETUPPUSH MENU TO EXITOFFZOOM MICFLASH ON AUTORED EYE REDUCTION ON OFFFLASH LEVEL NORMAL rREC-SPEED12bitRETURN ---- YESSPINDEX 2HOURWIND-CUT OFFRECORDING SETUPPUSH MENU TO EXITOFFZOOM MICFLASH ON AUTORED EYE REDUCTION ON OFFFLASH LEVEL NORMAL r16bitSetting Date and Time1 Press the [MENU] Button and rotate the [PUSH] Dial to select[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].2 Rotate and press the [PUSH] Dial to select[YEAR]/[MONTH]/[DAY]/[HOUR]/[MINUTE] and set it to adesired value.≥Year will cycle in the order shown below.2000, 2001, ..., 2089, 2000, ...3 Press the [MENU] Button to finish setting the date and time.≥The clock operation starts from [00] second.≥The menu will disappear when the button is pressed again.≥It is possible that the built-in clock in the Palmcorder may becomeinaccurate. Please check the time before recording. If the [0] Indication isflashing, charge the built-in lithium battery and reset the date and time.~~~~~~~~~~~~~~~~~~~~~~~~~Internal Lithium Battery RechargeThe internal lithium battery sustains the operation of the clock. When the [0]Indication is lit, the internal lithium battery is near discharge.1 Connect the AC Adaptor to the Palmcorder with the powerturned off and then connect to the AC Jack.≥After charging for 4 hours, the built-in lithium battery can power theclock for approximately 3 months.~~~~~~~~~~~~~~~~~~~~~~~~~LP ModeA desired recording speed can be selected with [REC-SPEED] on the[RECORDING SETUP] Sub-Menu. 1If LP Mode is selected, the recording time becomes 1.5 times longerthan that of SP Mode.Although the image quality does not decrease with the LP Mode recording,mosaic-like noise patterns may appear on a playback image, or some normalfunctions may be restricted.≥The contents that are recorded in LP Mode are not completely compatiblewith other equipment.≥Audio Dubbing is not possible with LP Mode. (l 34)~~~~~~~~~~~~~~~~~~~~~~~~~Audio Recording ModeThe sound quality of the recorded sound can be selected with [AUDIO-REC]on the [RECORDING SETUP] Sub-Menu. 2High sound-quality recording is possible with “16bit 48kHz 2 track” Mode.With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on2 tracks in stereo, while the other 2 tracks can be used for re-recording.