Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual

Also see for Palmcorder MultiCam PV-DV852: Service manual

Contents

Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual Manual pdf 34 page image

34A.DUB; A.DUB!1 2ZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM433, 5PUSHMENU W.B./SHUTTER/IRIS/VOL/JOGSEARCHAUTO MANUAL1, 2Playing Back on Your TVBy connecting your Palmcorder with your TV, the recorded scenes can beviewed on your TV screen.≥Before connecting them, turn off the power of both the Palmcorder and TV.1 Connect the [A/V IN/OUT] Jack of the Palmcorder to theVideo and Audio Input Jacks of the TV.≥Using the A/V Cable 1 (supplied), make a connection with theTV. If the TV has an S-Video Jack, connect the S-Video Cable(not supplied) 2, too.Making the Indications Appear on the TV screenPress the [OSD] Button 3 on the Remote Controller.≥Be sure to select the proper input on your TV. (If necessary, consult yourTV’s operating instructions.)≥If you play back a Cassette recorded with copyright protection signals, thescreen becomes blue or mosaic-like noise patterns appear.≥If you set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [IN/OUT],nothing will be shown on the TV screen except during playback.~~~~~~~~~~~~~~~~~~~~~~~~Audio DubbingYou can add music or narration to the recorded Cassette.≥If you perform audio dubbing onto a tape that was recorded with[AUDIO-REC] on the [RECORDING SETUP] Sub-Menu of the[CAMERA FUNCTIONS] Main-Menu set to [16bit], the original sound iserased. (If you want to preserve the original sound, use the [12bit] Modewhen recording.)≥Audio Dubbing cannot be performed onto recordings made in LP Mode.(l 19)1 Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK]>> [IN/OUT].2 And then select [A.DUB INPUT] >> [MIC] or [AV IN].≥Set to [AV IN] when external sound equipment is used, or set to [MIC]when an external or built-in microphone is used.3 Press the [1] Button, and then press the [;] Button at thepoint where you want to start dubbing.4 Press the [A.DUB] Button on the Remote Controller.≥[A.DUB;] Indication appears. 15 To start Audio Dubbing, press the [;] Button on the RemoteController.≥[A.DUB!] Indication appears. 2To Stop Audio DubbingPress the [;] Button on the Remote Controller.The Palmcorder is in the Still Playback Mode again.Playing Back the Sound Recorded with Audio Dubbing(For 12 bit Audio Recording)Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [AUDIO] >> [ST2]or [MIX].ST1: Play back only the original sound.ST2: Play back only the sound added by Audio DubbingMIX: Play back both the original sound and the sound added by AudioDubbing simultaneously.≥For other notes, see page 62.[VIDEO IN][S-VIDEO IN]1[AUDIO IN][S-VIDEO IN/OUT]2ZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM31A/V IN/OUTPHONESS-VIDEO IN/OUTD.STILL PICTUREMICTO PCDV