Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual

Also see for Palmcorder MultiCam PV-DV852: Service manual

Contents

Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual Manual pdf 46 page image

46Using the Software with a ComputerAn image stored on the DV Cassette can be transferred to your PersonalComputer.ª System Requirements for ArcSoft≥CD-ROM drive (for installation)(for ArcSoft Software)For Windows®≥IBM PC/AT or compatible≥Intel Pentium ll Processor: 266 MHz or more≥Windows® XP, Windows® Me, Windows® 98, Windows® 95, Windows® 2000Professional≥RAM: 64 MB or more≥300 MB minimum available hard disk space≥High color (16 bit) or more≥CD-ROM drive (for installation)≥Mouse or other pointing deviceFor Macintosh≥Mac OS 8.6 – 9.1≥RAM: 64 MB or more≥180 MB minimum available hard disk space≥High color (16 bit) or more(USB Driver For SD Memory Card)For Windows®≥IBM PC/AT or compatible≥Intel Pentium II Processor: 266 MHz or more≥Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows® 2000Professional pre-installed PC with USB port≥Microsoft and Windows are either registered trademarks or trademarks ofMicrosoft Corporation in the United States and/or other countries.≥Macintosh is a registered trademark of Apple Computer, Inc.≥All product/brand names are trademarks or registered trademarks of therespective holders≥Please refer to page 48, regarding the system requirements of USB Driver.ª Software Installation (Windows)1 Turn on Computer and start up Windows.2 Insert supplied CD-ROM into the CD-ROM drive.≥[Setup Menu] 1 appears.3 Select the software to be installed from [Setup Menu].≥USB Driver (l 48):Software for USB Driver allows you to transfer images directly off of thememory card into the computer(Please refer to page 48 to install the driver of the USB Driver.)≥G726 Decoder (l 49):Software for G726 Decoder allows you to listen to MPEG4 sound withWindows Media Player.≥ArcSoft Software (l 47):PhotoImpression 3.0, Photo Base 3.0, Panorama Maker 3.0 andPhotoPrinter 2000 Pro are included.4 Follow the instructions on the computer screen until theinstallation is complete.≥Setup window will disappear when the installation is complete.Note:If a window does not appear automatically, click the “Start” Button on yourdesktop and then click “Run”. When the “Run” Box is open, type in“D:\InstMenu.exe” and click “OK”. (“D” applies when the CD-ROM drive isdrive D.)ª Software Installation (Macintosh)1111 Turn on Computer and start up Macintosh.2222 Insert supplied CD-ROM into the CD-ROM drive.3333 Double click the icon of a CD-ROM that appears.4444 Double click the software to be installed from [ArcSoft].5555 Follow the instructions on the computer screen until theinstallation is complete.3 133334, 54, 54, 54, 5