Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual

Also see for Palmcorder MultiCam PV-DV852: Service manual

Contents

Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual Manual pdf 35 page image

35OPEN12321STILLTAPE CARDF 7 640VOICE125MPEG4PHOTOSHOTCARD MODEPICTUREPUSHMENU W.B./SHUTTER/IRIS/VOL/JOGAUTO MANUAL3, 4Special FeaturesUsing a Memory CardA Card can be used to record files or play back files.≥Use genuine SD Memory Card or MultiMediaCard only.ª Inserting a CardBefore inserting a Card, be sure to turn off the Palmcorder.1 Slide the [OPEN] Lever to the right and open the Card SlotCover.2 While holding the Card with its cut corner facing right 1,insert it into the Card Slot.3 Close the Card Slot Cover.Taking out a CardOpen the Card Slot cover and push the side of the card in the middle andthen pull it straight out to remove the card.≥After removing the card, close the Card Slot cover.ª [ACCESS] LampWhile the Palmcorder is accessing the Card (reading, recording, playback,erasing, moving of images), the [ACCESS] Lamp 2 lights up.≥While the [ACCESS] Lamp is on, never attempt to: open the Card SlotCover, pull out the Card, turn off the Palmcorder power, or switch the[TAPE/CARD] Selector. Such actions will damage the Card and cause thePalmcorder to malfunction.~~~~~~~~~~~~~~~~~~~~~~~~~Recording on the Memory CardThree kinds of data can be recorded by selecting with the[STILL/MPEG4/VOICE] Selector. When recording still pictures, select [STILL](Card PhotoShot), when recording moving pictures, select [MPEG4] (MPEG4Recording), when recording voice, select [VOICE] (Voice Recorder Function).≥If the [TAPE/CARD] Selector is set to [CARD], the Palmcorder isautomatically turned off when you leave it for about 5 minutes withoutperforming any PhotoShot recording.≥When the [TAPE/CARD] Selector is set to [CARD], you cannot record to theTape.ª Card PhotoShotStill pictures can be recorded on the Memory Card from the Palmcorder lensas well as from scenes that have already been recorded on a cassette.The size of images that are recorded using this Palmcorder is approximately1,230,000 pixels. Recording of images with a size that is larger than a millionpixels is called mega-pixel still-picture recording. Compared to images ofnormal recording, images that are created by mega-pixel still-picturerecording can be printed out more clearly.Recording from the Palmcorder Lens (Camera Mode)1 Slide the [TAPE/CARD] Selector to [CARD].2 Slide the [STILL/MPEG4/VOICE] Selector to [STILL].3 Set [CAMERA FUNCTIONS] >> [CARD SETUP] >>[PICTURE SIZE] >> [1280kkkk960] or [640kkkk480].4 Set the [PICTURE QUALITY] to desired picture quality.5 Press the [PHOTO SHOT] Button.≥The [ ] Indication will light in red.≥Mega-pixel recording (when you select [1280k960] in step 3) is useful fortaking clear pictures, but the following functions are disabled during mega-pixel recording.≥Digital zooming (l 22)≥Digital Effect functions (l 27, 28)≥Title In/Creation (l 41)≥The power is automatically turned off after about 5 minutes when a card hasbeen inserted.PICTURE