Panasonic Palmcorder Multicam PV-GS33 Operating Instructions Manual

Also see for Palmcorder Multicam PV-GS33: Operating instructions

Contents

Recording Mode-24-ª To Take Close-up Shots of SmallSubjects(Macro Close-up Function)When the zoom magnification is 1k, theCamcorder can focus on a subject that is as closeas approximately 1.6 inches (4 cm) from theLens. Small subjects like insects can be recordedwith this function.ª To Use the Tele-Macro FunctionWith the zoom magnification of 10k, theCamcorder can bring the subject into focus asclose as approximately 7.8 inch (20 cm) from theLens. Focusing only on the subject and displayingthe background out of focus makes the picturemore impressive.1 Press the [TELE MACRO] Button (5).≥The zoom magnification is fixed at 10k andthe subject can be focused on as close as7.8 inch (20 cm).≥The [ ] Indication appears.2 Press the Recording Start/Stop Button (41)or the [PHOTO SHOT] Button (35).To Cancel the Tele-Macro FunctionPress the [TELE MACRO] Button.ª To Use the Zoom MicrophoneFunctionAlong with the zooming operation, themicrophone’s directional angle and sensitivity arevaried for recording sounds.≥Set [TAPE RECORDING MENU] >>[RECORDING] >> [ZOOM MIC] >> [ON]. (The[Z.MIC] Indication is displayed.)≥For other notes concerning this item, see -48-.TELEMACRO(5)T.MACROT.MACROT.MACROPHOTO SHOT(35)(41)Z.MICZ.MICDigital Zoom FunctionThis function is useful when you want to recordclose-up shots of subjects located beyond anormal zoom range of 1k to 10k magnification.With the Digital Zoom Function, you can select amagnification from 25k up to 700k.1 Set [TAPE RECORDING MENU] >>[CAMERA] >> [D.ZOOM] >> [25t] or [700t].≥25k: Digital zooming to 25k≥700k: Digital zooming to 700k2 Push the [W/T] Lever (36) towards [W] ortowards [T] to zoom in or out.To Cancel the Digital Zoom FunctionSet [TAPE RECORDING MENU] >> [CAMERA]>> [D.ZOOM] >> [OFF].≥For other notes concerning this item, see -48-.Image Stabilizer FunctionIf the Camcorder is shaken while recording, thecamera shake in the image can be corrected.≥If the Camcorder shakes too much, the imagesmay not be stabilized.1 Set [TAPE RECORDING MENU] >>[CAMERA] >> [EIS] >> [ON].≥The [EIS] Indication appears.MENUSTILLENTERFADEis(14)20tW TD.ZOOMVOL/JOGW T(36)MENUSTILLENTERFADEis(14)EIS