Panasonic Palmcorder Multicam PV-GS33 Operating Instructions Manual

Also see for Palmcorder Multicam PV-GS33: Operating instructions

Contents

With a PC (optional)-39-With a PC (optional)Using the Software with a ComputerFollowing Software is not supplied with theCamcorder;≥LSFT0577 (DV STUDIO 3.1E-SE)≥K1HA05CD0005 (USB Cable)An image stored on the DV Cassette can betransferred to your Personal Computer. If youwould like to order, please refer to page -59-.ª Software Installation (For Windows)1 Turn on Personal Computer and start upWindows.2 Insert the CD-ROM into the PersonalComputer’s CD-ROM drive.≥The [Setup Menu] screen appears.3 Select the software to be installed from[Setup Menu].≥USB Driver -39-:This software Driver is for using DV STUDIO.≥WebCam Driver -40-:If the Camcorder is connected to yourpersonal computer to the other parties via thenetwork.≥DV STUDIO 3.1E-SE (Optional Software)-43-:With DV STUDIO 3.1E-SE software, yourfavorite scene on a tape can be captured toyour personal computer as a still image. Also,images viewed through the camera lens canbe captured to your personal computer.≥Acrobat ReaderTo view the installed operating instructions,Adobe Acrobat Reader 5.0 or higher isrequired. Please install Adobe AcrobatReader from the CD-ROM (OptionalSoftware).4 Follow the instructions on the computerscreen until the installation is complete.≥Setup window will disappear when theinstallation is complete.≥If a window does not appear automatically, clickthe “Start” Button on your desktop and thenclick “Run”. When the “Run” Box is open, type in“D:\InstMenu.exe” and click “OK”. (“D” applieswhen the CD-ROM drive is drive D.)Using USB Driverª Operating environment≥Despite having the operating environmentindicated, it may not be possible to use theprogram with some types of personalcomputers.≥A CD-ROM drive is requires to install thisprogram.OS:IBM PC/AT compatible personal computer withpre-installed;Microsoft Windows XP Home Edition/ProfessionalMicrosoft Windows 2000 ProfessionalMicrosoft Windows Me (Millennium Edition)Microsoft Windows 98 Second EditionCPU:Intel Pentium II/Celeron 300 MHz or higher(including compatible CPU)RAM:32 MB or more (64 MB or more recommended)(128 MB or more required for Windows XP)Free hard disk space:At least 30 MB or morePorts:USB Terminalª Installing USB DriverPlease install USB Driver first before connectingthe Camcorder to your Personal Computer withthe USB Connection Cable.1 Turn on the Personal Computer and start upWindows.2 Insert the CD-ROM into the PersonalComputer’s CD-ROM drive.≥Quit all applications.≥The [Setup Menu] screen appears.3 Click the [USB Driver].≥The set up program strarts running.4 For Windows 98SE/Me/2000 users, click[Restart] if the [InstallShield] dialogappears.≥Do not remove the CD-ROM.5 Finish installation by following theon-screen instructions.≥Click [Next] and proceed with installation.≥After completing the installation, Click[Finish].6 After the USB Driver is installed, pleaserestart your computer.≥Reboot the computer to finish installing USBdriver.≥Installation continues after the computerreboots if you selected additional software.