Panasonic SV-AV30 Operating Instructions Manual

Contents

56≥Electrical noise, static electricity or failureof the SD Multi AV Device or the MemoryCard may damage the Memory Card orerase the data stored on the MemoryCard. It is recommended to saveimportant data onto a personal computer.≥Some cards may pop out when they areremoved.ª Using the LCD Monitor (l 12)≥Forcefully rotating the LCD Monitorbeyond ranges described in theseoperating instructions will damage the SDMulti AV Device.≥Do not carry or store the SD Multi AVDevice with the LCD Monitor facingupward. Otherwise, the LCD Monitor maybe damaged.≥When the LCD Monitor is closed with itsdisplay section facing outward, operationwith the Multi-function Button or [MENU]Button is disabled. You can perform thefunction such as playing back, recordingand adjusting the volume, etc. with theremote controller.≥The LCD Monitor mayappear on the video to berecorded at some monitorset angles. Even if theLCD Monitor may not beviewed through the lens,it may appear if the videois viewed on a personal computer or if it isprinted.ª Using the Remote Controller/Earphones (l 12)≥Use the earphones supplied or one with acord of 10 ft. (3 m) or less.≥The earphones can be attached to themain unit directly without using the remotecontroller.≥If the earphones/remote controller areattached, the sound will not be output fromthe speaker.≥When the SD Multi AV Device is notturned [OFF] (is in the standby mode),press the [ ■ /1 ● ] button on the remotecontroller to activate it.≥The equalizer [EQ] is operational onlywhen playing back music files.ª Turning the Power On/SelectingOperation Modes (l 13)≥If the SD Multi AV Device is not used for10 minutes or longer, the power isautomatically turned off. Set the Power/Mode Switch to [OFF] and turn it back on.ª Using the Menu Screen (l 14)≥To abort the setting, press the [MENU]Button.≥While a Menu is displayed, you cannotrecord or play back.≥The menu screen does not appear duringrecording.ª Setting Date and Time (l 17)≥The built-in battery sustains the operationof the clock.≥The clock might cause a deviation fromthe correct date and/or time, so be sure tocheck the current date and/or time beforerecording.≥If the [PRESS MENU TO SET CLOCK]indicator is displayed, set the date andtime after the battery has charged. (l 49)ª Setting the Power SupplyFrequency (l 18)≥This setting may not completely suppressthe horizontal stripes.≥If this mode is used for outdoor recording,the entire image on the screen (orrecording images) may be tinged withwhite.≥This mode cannot be set or released whilerecording.