Panasonic SV-AV30 Operating Instructions Manual

Contents

655: During Playback an [k] Indication isdisplayed.5: The data was either recorded in adifferent format, or data is damaged.6: Even if a Memory Card is formatted,it cannot be used.6: Either the SD Multi AV Device or theMemory Card may be damaged.Please consult your Panasonic dealer.7: Playing back or recording do notfunction and the screen has frozen.7: Set the Power/Mode Switch to [OFF]and then set it back to [REC] or [PLAY]after a while (approx.1 minute). If theSD Multi AV Device is not turned offafter setting to [OFF], unplug the ACAdaptor and remove the battery.8: Sound is not heard while a stillpicture is played back.8: Sound is not presented in the StillPicture mode (recording or playingback of still pictures).9: Any images are not displayed onTV, although the SD Multi AV Deviceis connected with a TV.9-1: Connect the SD Multi AV Device to theTV correctly.9-2: Use the supplied AV cable.9-3: When the SD Multi AV Device is set to[REC] mode, the video or audio is notoutput from the [AV OUT] terminal.9-4: Video or audio is not output from the[AV OUT] terminal in which case theAV Output Control Switch on the AVCradle is set to [LCD MONITOR] or theAV Input Control Switch on the AVCradle is set to [AV IN AV OUT].Others1: How do I send an MPEG4 movingpicture recorded as e-mail?1: Capture the moving picture datarecorded on the SD Multi AV Deviceonto a personal computer and attach itto an e-mail to send it. In this case, it isrecommended to make a file size 1 MBor less. The recording time of 1 MBMPEG4 moving picture is approx. 8seconds (SUPER FINE), 15 seconds(FINE), 20 seconds (NORMAL) or 60seconds (ECONOMY). (The capacitylimit of the file which is attachable to ane-mail differs depending on theenvironment used.) If the file is playedback on the personal computer,Windows Media Player 6.4 or later isrequired. If the file is played back onMacintosh, use the Windows MediaPlayer for Macintosh. (Mac OS® 8.0 orlater) The Windows Media Player forMacintosh can be downloaded fromMicrosoft’s Web site.2: Red, blue, green or white dotsappear on the screen.2-1: 0.01% or less of the pixels of someLCD Monitors may remain turned on oroff.2-2: If the SD Multi AV Device is usedcontinuously for a long time or used ata high ambient temperature, red, blue,green or white dots may appear on thescreen and be recorded on a stillpicture. This is due to the rise of thetemperature inside the body. This iscaused by a characteristic of the C-MOS sensor and is not a failure. Underthis condition, turn the SD Multi AVDevice off and leave it for a while.≥C-MOS sensors are said to be anext-generation image pick-updevice succeeding CCDs as theyare small and consume lowamounts of power.3: When the USB cable is connected, agreen [?] mark is indicated in [USBMass Storage Device] in [DeviceManager] of the Windows OS.3: If the USB cable is connected withoutinstalling the USB Driver (supplied), [?]will be indicated on some OSs.Remove the USB cable from the SDMulti AV Device and install the USBDriver according to the procedureshown on page 44, and [?] willdisappear.