Panasonic SV-AV30 Operating Instructions Manual

Contents

60≥The White Balance may not be adjusted indark places.≥Adjustment of White Balance is effectiveunder the following conditions.-When recording under reddish lighting(halogen light bulb, incandescent lightbulb, etc.).-When recording a picture of mono-tonecolor.-When recording under multiple lightsources.ª Erasing the Files Recorded on aMemory Card (l 29)≥Erased files cannot be restored.≥This SD Multi AV Device cannot erase anymusic files (MP3 and MPEG2-AAC).≥The files recorded in the Voice Recordmode are automatically locked. Releasethe lock to erase them.≥Do not erase the Voice files recorded withthis SD Multi AV Device using otherdevices.≥A locked file cannot be erased. Releasethe lock to erase them.≥No files can be erased if the write protectswitch on the SD Memory Card is set to[LOCK].≥If a file is erased on the SD Multi AVDevice, the DPOF information set byanother camera may also be erased.≥A still picture file (other than JPEG) thatcannot be played back on the SD Multi AVDevice may be erased.≥Erasing many files may take a little time.Wait until the Card Access Lamp goes out.≥Recorded voice data always has serialnumbers even after an arbitrary file isdeleted. For example, if [100]TRACK003is deleted, the current [100]TRACK004will change into [100]TRACK003 and thefiles that follow will also changeaccordingly.≥Do not turn the power off or remove theMemory Card while a file is being deleted.Otherwise, the Memory Card may bedamaged.≥Delete audio (VOICE) files on the SD MultiAV Device.ª Protecting files (File Protection)(l 30)≥Even if files are locked, the files will bedeleted when the Memory Card isformatted.≥Any music files (MPEG2-AAC and MP3)cannot be locked or unlocked.≥Files recorded by Voice RecordingFunctions are automatically locked (toprevent accidental erasure).≥The File Protection carried out by this SDMulti AV Device is only effective for thisSD Multi AV Device.≥The SD Memory Card has a writeprotection switch on it. If the switch ismoved to the [LOCK] side, you cannotwrite to or format the Memory Card. If it ismoved back, you can.≥Locking/Unlocking many files may take alittle time. Wait until the Card AccessLamp goes out.ª Writing Printing Data on aMemory Card (DPOF Setting)(l 31)≥DPOF is the abbreviation of Digital PrintOrder Format. DPOF is used to selectimages you want to print. DPOF can onlybe used with products that support thisfeature.≥The number of prints can be set from 0 to99.≥This SD Multi AV Device may notrecognize the DPOF set by another typeof device.≥DPOF-setting many files may take a littletime. Wait until the Card Access Lampgoes out.