Panasonic Toughbook CF-H1CSLFZ6M Reference Manual

Also see for CF-H1 Series: Supplementary instructions Operating instructions Reference manual Operating instructions Operating instructions

59Fingerprint ReaderE Add a check mark for [Power-On] in [Password Types].F Enter the password (step C), and click [OK].G Click [Next].• Follow the on-screen instructions.NOTEz When you use the Power-on-Security feature, the fingerprints are stored in the fingerprint sensor regardless of theselected enrollment mode. The number of the available fingerprints appears in the display.You can increase your computer’s security level by setting the BIOS level described in this section.When you use this security function, you need to set the computer to the Cradle and connect an external keyboard to the Cra-dle whenever computer starts.Preparationz Set the computer to the Cradle and connect an external keyboard to the Cradle.1 Register the Supervisor Password.You have to register the Supervisor Password to proceed to the next step.If you have already registered the Supervisor Password, you can skip this step, and move on to step 2.If you have not done this, have enrolled your fingerprint using Protector Suite QL, and have already made Power-onSecurity effective, after step B, your fingerprint authentication will be necessary.A Turn on or restart the computer.B Press F2 or Del while [Panasonic] boot screen is displayed soon after the computer starts the startup proce-dure.C Select the [Security] menu.D Select [Setup Supervisor Password], and press (Enter).E Enter your password in the [Create New Password], and press (Enter).• The password will not be displayed on the screen.• You can use up to 32 alphanumeric characters (including spaces).• The case (upper/lower) is ignored.• You cannot use Shift and Ctrl to input a password.F Enter your password again in [Confirm New Password], and press (Enter).More Advanced Security