Panasonic Toughbook CF-H1CSLFZ6M Reference Manual

Also see for CF-H1 Series: Supplementary instructions Operating instructions Reference manual Operating instructions Operating instructions

84Setup UtilityNOTEz To boot from the following devices, make the settings as below.Underlined items are the factory presets.*5 Only when connected to CF-VEBH11AU : “Press F2 for Setup / F12 for LAN”*6 Only when connected to CF-VEBH11AU*7 You need to set the computer to the Cradle and connect an external keyboard to the Cradle, when the computer starts.To boot from You need to set• USB connected device : [Legacy USB Support] to [Enabled] (Î page 82)Security MenuBoot Prompt ConfigurationSetup Utility Prompt• When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup” *5 is not dis-played on [Panasonic] boot screen. However F2, F12*6 and Del will work even if the messageis not displayed.DisabledEnabledPassword on Boot DisabledEnabled*7Set Supervisor Password Enter the sub-menu.Hard Disk Lock• Can be changed only when [Set Supervisor Password] is set.DisabledEnabledUser Password Protection No ProtectionProtectedSet User Password• Can be changed only when [Set Supervisor Password] is set.Enter the sub-menu.XEmbedded Security (TPM) Enter the sub-menu.XFingerprint Security Enter the sub-menu.