QChanging Images for Thumbnails (Effect - Thumbnail)Normally,the first image of the recorded sceneis displayed as athumbnail: Youcan choose another imageof the scenefor thumbnail. Ifyou set a vivid image as the thumbnail, you can know what you recordedfroma glance at the Disc Navigation screen.Original !humbnail Youcan use this image as thumbnail./ I• • •1Press the DISC NAVIGATION button.2 Select the thumbnail of the scene to be changed.3 Press the MENU button.4 Choose"Scene", "Effect","Thumbnail", and thenpress the I_/11 button.5 The "Change Thumbnail"screen will appear. If you Iare sure you want tochange the thumbnail ofthe selected scene, pressthe I_/11 button: theselected scene will beplayed back.If you want to change the scene whosethumbnail is to be changed, you can change it onthis screen.7 The screen for verifyingswitching of thumbnail willappear: choose "YES",and then press the I_/11button.Choose "NO" to cancelswitching of thumbnail.After Yes or No setting, the "Change Thumbnail"screen will be restored.Repeat steps 5-7 to change other scenes.8 Press the • button to quit.Note:• If you press the MENU button before pressing the It-/llbutton in step 5, the submenu screen will appear. (Seepage 103)• A thumbnail of still cannot be changed.• Since the scene to which skipping is set cannot be playedback, you will not be able to change its thumbnail,Release the skip setting of the scene to change thethumbnail.O When the image you want to use as thethumbnail of the scene appears, press theSELECT button.104
