Inserting Battery into Remote Controller (Not included with VDR-M53PP)Insert the provided button type battery into remote controller.1Pull the battery holder out towards yourself whilepressing a thin rod or other object into the PUSHhole.2 Insert the button type battery with the positiveterminal facing down.3 Slide the battery holder to close it.Note:The life of the button type battery is approximately one year.If the battery is discharged, no operation is possible withremote controller. Replace the battery./ holderRemoving Battery from Remote Controller1 Pull the battery holder out towards yourself whilepressing a thin rod or other object into the PUSHhole.Warning:• KEEP THE BATTERY AWAY FROM CHILDREN ANDPETS.• IF SWALLOWED CONSULT A PHYSICIANIMMEDIATELY FOR EMERGENCY TREATMENT.• BATTERY MAY EXPLODE IF NOT HANDLEDPROPERLY. DO NOT RECHARGE, DISASSEMBLE ORDISPOSE OF IN FIRE.Warning:Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent typerecommended by the equipment manufacturer.Discard used batteries according to manufacturer'sinstructions. Risk of fire, explosion and burns. Do notrecharge, disassemble, heat above 212°F (100°C) orincinerate. Keep the Button-Type battery out of thereach of children. Never put Button-Type battery inmouth. If swallowed, call your doctor.Note:• Dispose of battery safely in accordance with local laws.Do not dispose of in fire.• Do not short circuit the battery.• Do not hold the battery with metallic tweezers.• Keep the battery in a dark, cool, dry place.• Make sure that none of the remote control buttons are leftpressed down as this will cause the battery to dischargerapidly.36
