Disc or Card ManagementVerifying Remaining Free Space on Disc or Card (Capacity)You can find out how long you will be able to record on one side of disc or on card.1 Press the DISC NAVIGATION button.2 Press the MENU button.3 Choose "Capacity" on the "Disc" or "Card" menuscreen, and then press the ,/ll button.(When using disc) (When using card)ICapaci_,_pproxVIDE//(XTRA): 17min"1 VIDEO(FINE): 26rainVIDEO(STD): 54minPHQTO : 996*2 Capacity : 90%[ _:R_TURN"1 With DVD-R disc: The quafity mode first used forrecording with disc will appea_*2 With DVD-R disc: This will not be displayed.I Oapac_tyApploxPHQTO(F]NE): 462PHOTO(NORM):924PHOTO(ECO) : 1148Capaci_ : 96%I_)RETURNQmlr'_eram4 Press the • button to quit.The Disc Navigation screen will be restored.Note:With a write-protected (see 'Terminology" on page 147)disc or locked card, the remaining space will always bedisplayed as 0".QProtecting Disc from Writing (Protect Disc)You can protect a DVD-RAM disc in order to prevent recorded images from being erased or edited bymistake. Further recording will not be possible on protected disc until the protection is released.1Press the DISC NAVIGATION button.2 Press the MENU button.3 Choose "Protect Disc" onthe "Disc" menu screen,and then press the ,/llbutton.Choose "NO" to cancelprotection.After "YES" or "NO"setting, the DiscNavigation screen willbe restored.Note:To release disc protection,Disc protect iconperform the same procedure as above: The screen forverifying the release of protection will appear.Choose YES" to release the protection.4 The screen for verifyingprotection will appear:Choose "YES", and thenpress the l,-/ll button.124
