Panasonic Viera TX-P42G30B Operating Instructions Manual

Auto Setup12Auto SetupSearch and store TV channels automatically.• These steps are not necessary if the setup has been completed by your local dealer.• Please complete connections (p. 10, 11) and settings (if necessary) of the connected equipment beforestarting Auto Setup. For details of settings for the connected equipment, read the appropriate manual.TV1 Plug the TV into mains socket and switch On• Takes a few seconds to be displayed.• If the red LED shows on the TV, press the Standby On / Off switchon the remote control for at least 1 second to turn the TV On.2 Select your countryCountry SelectionUnited Kingdom IrelandsetselectExample :CH 21 68CH 21 686262621010CBBC ChannelBBC Radio WalesE41062 10Cartoon Nwk29 -33 -BBC1SearchingCH Channel Name TypeFree TVFree TVFree TVFree TVAnalogueAnalogueQualityFree TV: 8 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2Auto Setup - DVB and AnalogueDVB ScanAnalogue ScanThis will take about 6 minutes.Auto Setup will start to search forTV channels and store them in thenumbered order as specified by thebroadcasters.• Actual number of channels maydiffer due to channel duplication.Example :CH 5 696262621010CBBC ChannelBBC Radio WalesE41062 10Cartoon NwkCH29 -CH33 -BBC1CH 1 99 41H: 21SearchingCH Channel Name TypeFree TVFree TVFree TVFree TVAnalogueAnalogueQualityFree TV: 8 Pay TV: 0 Radio: 0 Analogue: 2Auto Setup - DVB and AnalogueDVB ScanAnalogue ScanThis will take about 6 minutes.0% 100%Sending Preset DataPlease wait!Remote control unavailableIf Q-Link or similar technology (p. 84) compatible recorder with analoguetuner is connected, analogue channel setting is automatically downloadedto the recorder. (Digital channel setting is not downloaded.)• If downloading has failed, you can download later through the Setup Menu.“Q-Link Download” (p. 34)3 Setup the network connectionSetup the network connection to enable the network service functionssuch as VIERA Connect, etc. (p. 16, 71).• To setup the wireless connection, the Wireless LAN Adaptor(optional accessory) is required.Please note that this TV does not support wireless public access points.• Ensure the network connections (p. 11) and network environment arecompleted before starting setup.Select the network typeNetwork SetupSelect Wired or WirelessWired Wireless Set later[Wired] “Wired connection” (p. 11)[Wireless] “Wireless connection” (p. 11)accessselect • To setup later on orskip this stepSelect [Set later]or EXITQuick Start Guide