Panasonic Viera TX-P42G30B Operating Instructions Manual

How to Use Menu Functions33Menu Item Adjustments / Configurations (alternatives)SoundEqualiserAdjusts the frequency level to suit your favourite sound quality• This function is available when [Mode] is set to [User].• Select the frequency and change the frequency level by using the cursor button.• If you want to enhance the bass sound, raise the level of the lower frequency. Ifyou want to enhance the treble sound, raise the level of the higher frequency.• To reset the levels of each frequency to the default settings, select the [Resetto Defaults] by using the cursor button, and then press the OK button.Balance Adjusts volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings [Off] / [V-Audio] / [V-Audio Surround][V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects[V-Audio Surround] : Provides a dynamic enhancer of width and depthto simulate improved spatial effectsAuto Gain Control Automatically regulates large sound level differences between channelsand inputs [Off] / [On]Volume Correction Adjusts the volume of individual channel or input modeSpeaker Distanceto WallCompensates for the distance between the speakers and the wall[Over 30cm] / [Up to 30cm]• If the distance between the TV and wall is over 30 cm, [Over 30cm] is recommended.• If the distance between the TV and wall is within 30 cm, [Up to 30cm]is recommended.Preferred MultiAudio • Selects the preferred language for digital channel multi audio(depending on the broadcaster) [English] / [Welsh] / [Gaelic] / [Irish]NICAMNear Instantaneous Companded Audio MultiplexReproduces NICAM stereo sound [Off] / [On]• Off if reception is poor (FM monaural sound)• Analogue mode onlySPDIF SelectionSPDIF : A standard audio transfer file formatSelects the initial setting for digital audio output signal from DIGITALAUDIO OUT and HDMI2 (ARC function) terminals [Auto] / [PCM][Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output as Dolby Digital Bitstream.MPEG is output as PCM.[PCM] : Digital output signal is fixed to PCM.• For DVB mode, network video contents (p. 79) or Video mode of Media Player (p. 65)• ARC (Audio Return Channel) : A function of digital audio output using HDMI cableHDMI1 / 2 / 3 / 4InputSelect to fit the input signal [Digital] / [Analogue] (p. 97)[Digital] : When sound is carried via the HDMI cable connection[Analogue] : When sound is not carried via the HDMI cable connection• HDMI input mode onlyAudio Description MenuAudioDescriptionNarration settings for visually impaired users [Off] / [Auto]Set to [Auto] to activate the narration sound track when available on thebroadcast• The availability of audio description sound track is indicated by [AD] inthe information banner (p. 18).• DVB mode onlyVolume Adjusts the volume for Audio Description• DVB mode onlySpeakers Set to [On] to activate the description sound track from TV speakers [Off] / [On]• DVB mode onlyHeadphones Set to [On] to activate the description sound track from headphones [Off] / [On]• DVB mode onlyReset to Defaults Press the OK button to reset the present Sound Mode, [Balance],[Headphone Volume] and [Surround] to the default settings