Watching External Inputs28Operating the equipment with the TV remote controlThe equipment connected to the TV can be directly operated with the below buttons of this TV remotecontrol.DVD/VCR TVSelection Switch for operating the connected equipmentSelect “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player, Playertheatre, Blu-ray Disc theatre or VCR“How to change the code for the type of the equipment” (see below)Select “TV” to use USB HDD Recording, Media Player or VIERA Link“USB HDD Recording” (p. 58)“Media Player” (p. 66, 68)“VIERA Link Control” (p. 88)StandbySet to Standby mode / Turn onPlayPlayback videocassette / DVD / video contentStopStop the operationsRewind / Skip / SearchVCR :Rewind, view the picture rapidly in reverseDVD / video content :Skip to the previous track, title or chapterPress and hold to search backwardFast-forward / Skip / SearchVCR :Fast-forward, view the picture rapidly forwardDVD / video content :Skip to the next track, title or chapterPress and hold to search forwardPausePause / ResumeDVD : Press and hold to play at slow speedPROGRAMME Channel Up / DownSelect channelREC RecordStart recordingHow to change the code for the type of the equipmentEach type of the Panasonic equipment has its own remote control code.Please change the code according to the equipment you want to operate.1 Set the position to “DVD/VCR”DVD/VCR TV2 Press and hold during the following operationsEnter the appropriatecode, see table belowabc defjklghi mnotuvpqrs wxyzPressType of the equipment CodeDVD Recorder, DVD Player, Blu-ray Disc Player 70 (default)Player theatre, Blu-ray Disc theatre 71VCR 72Note• Confirm if the remote control works correctly after changing the code.• The codes may be reset to default values if batteries are replaced.• Some operations may not be possible on some equipment models.