Panasonic Viera TXL32C2B Operating Instructions Manual

Also see for Viera TXL32C2B: Service manual

12DIRECT TV RECASPECT NINPUTTV AVOPTIONTEXT STTL INDEX HOLDPROGRAMMERETURNTVEXITjklghi mnotuvpqrs wxyzabc defAuto SetupSearch and store TV channels automatically.These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual.1 Plug the TV into mains socket and switch On(Takes a few seconds to be displayed)If the red LED shows on the TV, press the Standby On / Off switch on the remotecontrol for at least 1 second to turn the TVOn.Auto Setup - DVB and AnalogueAnalogue ScanThis will take about 6 minutes.CH 21 68DVB Scan CH 21 6862CH Channel Name Type QualityCBBC Channel Free TV 1062 BBC Radio Wales Free TV 1062 E4 Free TV 1062 Cartoon Nwk Free TV 1029 Analogue -33Free TV: 8 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2SearchingBBC1 Analogue -Auto Setup will start to search for TVchannels and store them in the numberedorder as specified by the broadcasters.Actual number of channels may differ due to channel duplication.Sending Preset DataPlease wait!0% 100%Remote control unavailableIf Q-Link, or similar technology (p. 50),compatible recorder with analogue tuneris connected, analogue channel setting isautomatically downloaded to the recorder.(Digital channel setting is not downloaded.)If downloading has failed, you can download later through the Setup Menu.“Q-Link Download” (p. 29)2 Input Owner IDOwner IDPlease enter new PINPIN * * * * Please enter your own choice of PIN number,name, etc. (p. 13) to help the police to crackcrime.Make a note of the PIN number in case you forget it. The PIN number cannot be reset.You can input or change the Owner ID later. “Owner ID” (p. 45)To skip this step EXITThis step will be skipped in the Auto Setup after “Shipping Condition” (p. 44) isperformed.3 Select “Home”Please select your viewing environment.Home ShopsetselectSelect “Home” viewing environment (highlight“Home” in yellow) to use in your homeenvironment.Auto Setup is now complete and your TV is ready for viewing.To check channel list at-a-glance “Using TV Guide” (p. 18)To edit or hide (skip) channels “Tuning and Editing Channels” (p. 36 - 39)If tuning has failed, check the connection of the RF cable, and then, follow the on screeninstructions.