Panasonic Viera TXL32C2B Operating Instructions Manual

Also see for Viera TXL32C2B: Service manual

30How to Use Menu FunctionsMenu Item Adjustments / Configurations (alternatives)SetupAnalogueTuning MenuChannel List Skips the unwanted Analogue channels or edits Analogue channels (p. 39)Auto Setup Automatically sets the Analogue channels received in the area (p. 35)Manual Tuning Sets the Analogue channels manually (p. 39)Display SettingsTeletext Analogue teletext display mode (FASTEXT / List) (p. 22)Preferred Subtitles Selects the preferred language for digital channel subtitles (depending on thebroadcaster) (English / Welsh / Gaelic)To display subtitles p. 16Input Labels Labels or skips each input terminal (p. 43)Banner Display Timeout Sets how long the Information banner (p. 15) stays on screen(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)Playing Time Display Set to “On” to display a continuous record of time spent using Game mode every30 mins (Off / On)This function is available when “Game” is selected in “Viewing Mode” (p. 28).Radio ModeSets the timer for turning off the screen automatically when a radio channel isselected (Off / 5 / 10 / 15 / 20 seconds)The sound is active even if the screen turns off. Press any button (except Volume Up / Down and Sound Mute buttons) to turn the screen on.This function is effective in reducing power consumption when listening to a radio channel.System menuShipping Condition Resets all settings, for example, when moving house (p. 44)Owner ID Inputs the owner ID (p. 45)Common Interface Uses include to watch pay-TV (p. 46)System Update Downloads new software to TV (p. 47)Software Licence Displays the software licence informationSystem Information Displays the system information of this TVOther SettingsGUIDEPlus+SettingsPostcode Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 20)SystemInformation Displays the system information of the GUIDE Plus+ systemPower on PreferenceAutomatically selects the input when the TV is turned on (TV / AV)Set to “TV” to view picture from TV tuner.Set to “AV” to view input from an external equipment connected to a SCARTterminal, e.g. satellite receiver.The external equipment must be switched on and sending a control signal for automatic switching at power on to occur.Power on ChannelListAutomatically selects All Channels or Favourites list in the Information banner(p. 15) when the TV is turned on (All Channel List / Last)Set to “All Channel List” to display all the channels.Set to “Last” to display the one you selected last time.Not available on analogue modeAuto StandbySets the time the TV automatically goes to Standby mode when no operation isperformed for the selected times (Off / 2 / 4 hours)Starting Timer Programming automatically does not affect this function. Automatic input switching with the connected equipment affects this function and time-count will be reset.The notification message will appear 3 minutes before going to Standby mode.Power Save Reduces brightness of picture to economise on power consumption (Off / On)16:9 OverscanSelects the screen area displaying the image (Off / On)On : Enlarges the image to hide the edge of the image.Off : Displays the image in the original size.Set to “On” if noise is generated on the edge of the screen. This function is available when aspect is set to Auto (16:9 signal only) or 16:9. This function can be memorized separately for SD (Standard definition) and HD (High definition) signals.DVI Input SettingChanges the black level in the image for HDMI input mode with DVI input signalmanually (Normal / Full)When the DVI input signal from the external equipment, especially from PC, is displayed, the black level may not be suitable. In this case, select “Full”.The black level for HDMI input signal will be adjusted automatically. For HDMI input mode with DVI input signal onlyA different menu will be displayed while SD Card is used. (p. 48 - p. 49) Only available items can be selected. If “Demo Settings” item is displayed in the Setup Menu, the TV is in “Shop” viewing environment (p. 13). To return to “Home” viewing environment initialise all settings by accessing Shipping Condition.”Shipping Condition” (p. 44)