Watching External inputsBasic25Screen displayTerminal AV1 AV2 COMPONENT HDMIManual input(defaultsetting in“Input Labels” ) AV1AV1-S-VideoAV1-RGBAV2 COMPONENT HDMIAuto input(EC mode orVIERA Link ) EC/AV1EC/AV1-S-VideoEC/AV1-RGB EC/HDMIApplicable for EC mode and VIERA LinkOperating the equipment with the TV remote controlThe Panasonic equipment connected to the TV can be directly operated with the below buttons ofthis TV remote control.StandbySet to Standby mode / Turn onPlayPlayback videocassette / DVDStopStop the operationsRewind / Skip / SearchVCR: Rewind, view the picture rapidly in reverseDVD: Skip to the previous track or titlePress and hold to search backwardFast-forward / Skip / SearchVCR: Fast-forward, view the picture rapidly forwardDVD: Skip to the next track or titlePress and hold to search forwardPausePause / ResumeDVD: Press and hold to play at slow speedPROGRAMME Channel Up / DownSelect channelREC RecordStart recordingHow to change the code for the type of the equipmentEach type of the Panasonic equipment has its own remote control code.Please change the code according to the equipment you want to operate.If you operate the connected equipment in VIERA Link (p. 56), select the code “73”.Press and hold during the following operationsEnter the appropriate code,see table belowjklghi mnotuvpqrs wxyzabc defPressType of the equipment CodeDVD Recorder, DVD Player 70 (default)Player theatre, Blu-ray Disc theatre 71VCR 72The equipment using in VIERA Link“VIERA Link Control” (p. 56)73NoteConfirm if the remote control works correctly after changing the code. The codes may be reset to default values if batteries are replaced. Some operations may not be possible on some equipment models.If the above information is permanently displayed on the top left of the screen, press the button to clear.