Panasonic WJ-FS616C Operating Instructions Manual

Also see for WJ-FS616C: Operating instructions

Contents

32RECORD OR MULTISCREEN 2 OUTPUT SETUPThe procedure described below let you determine themode for the REC OUT connector on the rear of the videomultiplexer.As described before, this output can be used for recordingimages on the time lapse VCR or monitoring images asmultiscreen 2 monitor.1. Move the cursor to the REC/MULTI2 parameter in theSETUP MENU by pressing the C or D button.2. Select either REC OUTPUT or MULTI2 OUTPUT bypressing the A or B button.REC OUTPUT: Enables recording images on the timelapse VCR.MULTI2 OUTPUT: Enables monitoring images on theconnected multiscreen 2 monitor.The factory default setting is REC OUTPUT.3. Press the [HOME/SET] button to execute the selectionand then the selected submenu will appear on the mon-itor screen. Record Output SetupSelect REC OUTPUT in the menu and then press the[HOME/SET] button.The REC OUTPUT SETUP menu as shown in the figureappears on the monitor screen.These items let you determine the mode for recording onthe time lapse VCR. Camera Title DisplayThis item lets you enable or disable recording of the cam-era title on the VCR.1. Move the cursor to the TITLE DISPLAY parameter.2. Select either ON or OFF.ON: Enables recording of the camera title on the VCR.OFF: Disables recording of the camera title on the VCR.The factory default setting is ON. Clock DisplayThis item lets you enable or disable recording of the clockdisplay on the VCR.1. Move the cursor to the CLOCK DISPLAY parameter.2. Select either ON or OFF.ON: Enables recording of clock display on the VCR.OFF: Disables recording of clock display on the VCR.The factory default setting is ON.WJ-FS616C SETUP MENUALARM SETUP *MULTI OUTPUT SETUP *SPOT OUTPUT SETUP *REC/MULTI2 REC OUTPUT *SYSTEM SETUP *CAM DOWNLOAD NOCAM UPLOAD NOALL RESET SELECT *REC OUTPUT SETUPTITLE DISPLAY ONCLOCK DISPLAY ONDYNAMIC REC SETUP *REC MODE SETUP *