Panasonic WJ-FS616C Operating Instructions Manual

Also see for WJ-FS616C: Operating instructions

Contents

34 Multiscreen 2 Output SetupThese items let you select the display mode when connect-ing the Record Output (REC OUT) to the monitor for multi-screen 2 monitor.1. Move the cursor to the REC/MULTI2 parameter in theSETUP MENU.2. Select MULTI2 OUTPUT and then press the[HOME/SET] button.The MULTI2 OUTPUT SETUP menu as shown in the fig-ure appears on the monitor screen.3. Select the desired switching timing indicated as thefield interval (4 to 999) by pressing the A or B button.Notes:• Numbers can also be input directly with the CameraNumber buttons (1 - 10).• Refer to the operating instructions of the VCR forswitching timing.When MODE9 is selected in this table, select EXT1or EXT4 by pressing the A or B button.EXT1: Enables spot image recording on the VCR.EXT4: Enables quad images recording on the VCR.4. Press the [HOME/SET] button to move the cursor to theright in the recording mode title column.The square cursor appears in the character table.5. To select a character, move the cursor on the desiredcharacter in the table by pressing the C, D, A, or Bbuttons.6. Press the [HOME/SET] button to pick up the characterand place it in the title column.7. Repeat steps 5 and 6 above to edit the title.8. If a wrong character is selected, press the - or +button to move the cursor in the title column.Note: Press the + button to move the cursor to the right,or press the - button to move the cursor to the left.Then press the [HOME/SET] button to overwrite thecharacter with the character selected from the table.9. Press the [SET UP/ESC] button. The cursor moves toMODE number.10. Repeat steps 1 to 9 above to assign the other MODEnumbers.11. After completing the setting, press the [SET UP/ESC]button to return to the REC OUTPUT SETUP menu.12. After finishing the setting, press the [SET UP/ESC] but-ton to return to the previous SETUP MENU.WJ-FS616C SETUP MENUALARM SETUP *MULTI OUTPUT SETUP *SPOT OUTPUT SETUP *REC/MULTI2 MULTI2 OUTPUT *SYSTEM SETUP *CAM DOWNLOAD NOCAM UPLOAD NOALL RESET SELECT *MULTI2 OUTPUT SETUPDISPLAY POSITION *SEQUENCE MODE SEQ2