Panasonic WJ-FS616C Operating Instructions Manual

Also see for WJ-FS616C: Operating instructions

Contents

382. Select SEQ1 and then press the [HOME/SET] button.The SEQ1 SETUP menu shown in the figure appears onthe monitor screen.Auto Skip1. Move the cursor to the AUTO SKIP parameter.2. Select either ON or OFF.ON: Enables the auto skip function.OFF: Disables the auto skip function.The factory default setting is OFF.Note: The auto skip function is not available when play-ing back videotape images.Image Assignment1. Move the cursor to the CAM column you want to edit forthe step number by pressing the C, D, A or B button.2. Select the desired camera or playback channel in theCAM column by pressing the - or + button.1 - 16: Camera ChannelP1 - P16: Playback Channel–: Not AssignedNotes:• Pressing the Camera Number button assigns thecamera channel directly.• Any playback steps programmed in a sequence areexcluded from display on the spot monitor and mul-tiscreen 2 monitor due to the way the system isdesigned.3. Repeat steps 1 and 2 above to assign other steps.Preset Position1. Move the cursor to the PRE column you want to edit forthe step number by pressing the C, D, A or B button.2. Select the desired preset position number for the cam-era in the PRE column by pressing the - or + button.Note: A preset position assigned to a step that hasbeen assigned to a playback channel is invalid.3. Repeat steps 1 and 2 above to assign other steps.Dwell Time• Uniform Dwell Time1. Move the cursor to the DWELL TIME parameter bypressing the C or D button.2. Select the desired dwell time by pressing the A orB button.Dwell Time can be selected between 0SEC and30SEC.Note: If 0SEC is selected for the dwell time, thespot sequence is not activated.• Individual Dwell Time1. Move the cursor to the TIME column you want toedit for the step number by pressing the C, D, Aor B button.2. Select the desired dwell by pressing the - or +button.Steps for which a different dwell time has beenselected are marked “–” in the DWELL TIME para-meter. Previous settings made in the DWELL TIMEparameter become invalid.Programming Steps 17 to 321. Press the [FUNCTION] button to display the next pageof the table.The table shown in the figure appears on the monitorscreen.2. Program the sequence pattern for steps 17 to 32 asdescribed previously.3. Press the [FUNCTION] button to display the previouspage of the table.SEQ1(SPOT-SEQUENCE)SETUP 2 OF 2STEP CAM PRE TIME STEP CAM PRE TIME17 - - 2SEC 25 - - 2SEC18 - - 2SEC 26 - - 2SEC19 - - 2SEC 27 - - 2SEC20 - - 2SEC 28 - - 2SEC21 - - 2SEC 29 - - 2SEC22 - - 2SEC 30 - - 2SEC23 - - 2SEC 31 - - 2SEC24 - - 2SEC 32 - - 2SECSEQ1(SPOT-SEQUENCE)SETUP 1 OF 2AUTO SKIP OFFDWELL TIME 2SECSTEP CAM PRE TIME STEP CAM PRE TIME1 1CH - 2SEC 9 9CH - 2SEC2 2CH - 2SEC 10 10CH - 2SEC3 3CH - 2SEC 11 11CH - 2SEC4 4CH - 2SEC 12 12CH - 2SEC5 5CH - 2SEC 13 13CH - 2SEC6 6CH - 2SEC 14 14CH - 2SEC7 7CH - 2SEC 15 15CH - 2SEC8 8CH - 2SEC 16 16CH - 2SEC