Panasonic WJ-FS616C Operating Instructions Manual

Also see for WJ-FS616C: Operating instructions

Contents

36SYSTEM SETUPThe procedure described below let you determine the sys-tem designation and display the system status.1. Move the cursor to SYSTEM SETUP in the SETUPMENU and then press the [HOME/SET button.The SYSTEM SETUP menu as shown in the figureappears on the monitor screen.2. Press the [FUNCTION] button to display the next pageof the menu. Press this button again to return to the pre-vious page of the menu. Clock SetupThis item lets you set the current time and date.1. Move the cursor to CLOCK SETUP in the SYSTEMSETUP menu and then press the [HOME/SET] button.The cursor moves to the right editing area.2. Select the month by pressing the A or B button.3. Move the cursor to the right by pressing the C or Dbutton, then select the date by pressing the A or Bbutton.4. Select the last 2 digits for the year and time (militarytime) as similarly by pressing the C or D button andthe A or B button.5. After completing the setting, press the [SET UP/ESC]button to move the cursor to CLOCK SETUP.The selected time and date are updated when the [SETUP/ESC] button is pressed. Clock Display PositionThis item lets you select the position where the clock will bedisplayed on the monitor screen.1. Move the cursor to CLOCK POSITION in the SYSTEMSETUP menu and then press the [HOME/SET] button.The position setting menu shown in the figure appearson the monitor screen.2. Move the clock position by pressing the C, D, A or Bbutton.Note: In the multiscreen display with the multiscreenoutput or record output, the clock display is shiftedone line from the preset position if the camera titleand the clock are preset to the same position.3. Press the [SET UP/ESC] button to execute the selectionand return to the previous SYSTEM SETUP menu.WJ-FS616C SETUP MENUALARM SETUP *MULTI OUTPUT SETUP *SPOT OUTPUT SETUP *REC/MULTI2 REC OUTPUT *SYSTEM SETUP *CAM DOWNLOAD NOCAM UPLOAD NOALL RESET SELECT *SYSTEM SETUP 1 OF 2CLOCK SETUP JAN 1.97 0:00CLOCK POSITION *TITLE SETUP *TITLE POSITION *SEQUENCE SETUP SEQ1 *SEQ TIMING-MLT INT(TIME-ADJ)SEQ TIMING-SPT INTLOCK MODE ALLSYSTEM SETUP 2 OF 2CABLE COMP/VD2/DATA SETUP *ALM TERMINAL SETUP *PLAYBACK MODE FIELDDATA MODE CURS-232C MODE VCRCOM PORT SETUP *VCR IN SELECT VIDEODAISY MODE OFFUNIT ADDR.SET 1PASSWORD OFFDEC11.96 12:00:00CAMTITLE