Panasonic WJ-FS616C Operating Instructions Manual

Also see for WJ-FS616C: Operating instructions

Contents

543. Press the [FUNCTION] button. The indicator in the but-ton starts to blink.4. Select the playback channel you want to display bypressing the corresponding [1 – 16] button.The indicator in the [FUNCTION] button lights, and theselected playback image is displayed in the upper leftsegment of the multiscreen.5. To display another playback image, press the [FUNC-TION] button.The indicator in the button starts to blink.Select the channel you want to display by pressing thecorresponding [1 – 16] button.6. To return to the camera images multiscreen, press the[MULTISCREEN SELECT] button.Or to display the playback image in single spot mode,press the [VCR/CAM] button.Note: To return to the previous camera images multi-screen, press the [FUNCTION] button while theindicator in the button is blinking.3. To return to single spot monitoring, select an image tobe displayed by pressing a [1 – 16] button.Or to return to screen segments display, press the[MULTISCREEN SELECT] button.Note: The same channel cannot be displayed in multi-ple segments.If this attempt is made, only the image of the chan-nel with the lowest number is displayed; the othersegments appear black out. Displaying the Camera and PlaybackImagesThe following procedures are not applicable to theMultiscreen 2 Monitor.• One segment of the multiscreen for camera images canbe assigned to playback.• This function is available with the 4-, 7-, 10- or 13-seg-ment multiscreen modes.• The playback image will be displayed in the upper leftsegment of the multiscreen.• This function is not available when S-VIDEO playbackinput is used.To enable this function, connect with the VIDEO play-back input at the same time. The VIDEO playbackimage is displayed automatically without making anysetting changes. Multiscreen Spot(Live Images with a Playback Image)1. Select the cameras live mode (indicator off) by pressingthe [VCR/CAM] button.2. Select the screen segments to be displayed on themonitor by pressing the [MULTISCREEN SELECT] but-ton repeatedly.Confirm that the 4-, 7-, 10- or 13-segment multiscreen isselected for the camera images.If not, press the [MULTISCREEN SELECT] buttonrepeatedly until the desired multiscreen appears.VCRCAM1 2 34 56 7 8 910 11 12 131 23 4 5 67 8 9 101 23 4 56 71324FUNCTIONCamera1Camera2Camera3Camera4Playback Camera2Camera3Camera4