Panasonic WJ-GXE500 Operating Instructions Manual

Also see for WJ-GXE500: Product catalog Integration note Product catalog Installation guide Installation guide

Contents

Panasonic WJ-GXE500 Operating Instructions Manual Manual pdf 40 page image

40*12 • When "Frame rate" is set for "Transmission priority", number of users who can access the unit may bedecreased.*13 • When "Frame rate" is selected for "Transmission priority", this setting is available.*14 • "Frame rate" is synchronized with "Max bit rate (per client) *". For this reason, the frame rate may be lowerthan the specified value when any value marked with an asterisk (*) is selected.*15 • "Unlimited *" is available when "Frame rate" is selected for "Transmission priority".*16 • The bit rate is synchronized with "Bandwidth control(bit rate)" on the [Network] tab of "Network" page. Forthis reason, the bit rate may be lower than the value when any value with an asterisk (*) on the right isselected.*17 • When "Unlimited *" is selected for either "MPEG-4(1)" or "MPEG-4(2)", the maximum concurrent accessnumber is 1 user.*18 • When "Constant bit rate" is selected for "Transmission priority", this setting is available.*19 • Depending on the setting or photographic subject, images may not be refreshed at the exact designatedinterval.*20 • When "Multicast" is selected, set the value of "Bandwidth control(bit rate)" on the [Network] tab of"Network" page greater than the total value of "Max bit rate (per client) *" of all the channels in use.*21 • The following port numbers are unavailable since they are already in use.10 669, 10 670*22 • When audio is transmitted from the unit, the port number to be used will be the multicast port numberplus "1 000".*25 • When "On" is selected for "MPEG-4 transmission" of "MPEG-4(1)", the setting values selected for"MPEG-4(1)" will be applied.[Image/Position] tabRefer to page 28 for general information about this tab.Setup items Setting values (Underlined: default):Ch No. 1/2/3/4Menu On/OffOperation buttons SetUpDownLeftRightEscReset/SpecialAll ResetZoom Zoom out/x1/Zoom inFocus Auto/Near/FarControl pad