Panasonic WJ-GXE500 Operating Instructions Manual

Also see for WJ-GXE500: Product catalog Integration note Product catalog Installation guide Installation guide

Contents

Panasonic WJ-GXE500 Operating Instructions Manual Manual pdf 49 page image

49[Advanced func.] page[XML notification] tabRefer to page 28 for general information about this tab.Setup items Setting values(Underlined: default)XML notification *1 XML notification *2 On/OffNotification interval 1s/2sDestination setting forXML notificationDestination1 - 2 Destination address (Default: None (blank))Destination port number *3 1 - 65535(Default: None (blank))Destination path name (Default: None (blank))User name (Default: None (blank))Password (Default: None (blank))*1 • When "D1" is selected for "Image capture mode", it is impossible to activate the XML notification function.*2 • When "On" is selected, face detection information is notified to the designated destination server in theXML format.*3 • The following port numbers are unavailable since they are already in use.20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10 669, 10 670[Face detection] tabRefer to page 28 for general information about this tab.Setup items Setting values (Underlined: default)Face detection Face detection *1 *2 *3 *4 On/OffXML notificationImportant:• When "Multicast" is selected for "Transmission type" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab and "On" isselected for "Priority stream" on the [System] tab, it may sometimes be impossible to display the face detectionsetup window.*1 • The face detection function shall not guarantee the detection of faces in an image. The face detectionaccuracy varies with imaging conditions.*2 • When "Mosaic" is selected for "Display type" of "Privacy zone", the face detection function may some-times be triggered (the face detection frame will be displayed).*3 • When "D1" is selected for "Image capture mode", it is impossible to activate the face detection function.*4 • Face detection is available on Ch1 only.