Panasonic WJ-GXE500 Operating Instructions Manual

Also see for WJ-GXE500: Product catalog Integration note Product catalog Installation guide Installation guide

Contents

Panasonic WJ-GXE500 Operating Instructions Manual Manual pdf 42 page image

42*4 • When "Multicast" is selected for "Transmission type" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab of the"Image/Audio" page, audio transmission will become unavailable while monitoring H.264 (or MPEG-4)images. To transmit audio, click the [JPEG] button on the "Live" page.*5 • When selecting a smaller value for "Bandwidth control(bit rate)" on the [Network] tab of the "Network"page (☞ page 54) while putting a priority on the JPEG/MPEG-4 image transmission, select "16kbps" for"Audio bit rate".*6 • When a shorter interval is selected, delay time will be shorter.*7 • Making the value bigger will result in a longer delay, but audio interruptions can be minimized.*8 • Audio may temporarily be interrupted or noise may be heard the unit, or when multiple users are access-ing concurrently. It may be possible to diminish the interruption or noise by setting a longer interval for"Audio output interval (PC to Camera)".*9 • Audio may sometimes not be heard depending on the network environment.*10 • The transmission port number entered for "Audio output port (PC to Camera)" will be used only when"Unicast port (MANUAL)" is selected for "Transmission type".When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission") (☞ pages 34 and 37) or when"Unicast (AUTO)" or "Multicast" is selected for "Transmission type", it is not necessary to enter the trans-mission port number.[Coaxial/RS-485] tabRefer to page 28 for general information about this tab.Setup items Setting values (Underlined: default)Coaxial Video sync *1 *2 Ch1/IntCh1 - Ch4 VD2 *3 On/OffData *4 On/OffCable compensation *5 *6 *7 S/M/LRS-485 Communication protocol *8 *9 *10 4-line/2-lineBaud rate 2400bps/4800bps/9600bps/19200bps/38400bpsData bit 7bit/8bitParity check None/Odd/EvenCh1 - Ch4 Data *11 On/OffUnit address *12 (Default: [Ch1] 01 [Ch2] 02 [Ch3] 03 [Ch4] 04)Important:*1 • When "Ch1" is selected for "Video sync", the unit is synchronized with the video signal that is input toCh1. Synchronize other video signals that are input to other channels with Ch1.*2 • When "Ch1" is selected for "Video sync", the unit is synchronized with the phase of the video signal thatis input to Ch1. Synchronize the phases of other video signals that are input to other channels with Ch1.*5 • Perform the settings for the cable compensation properly according to the cable length. Otherwise cam-era pictures may not be displayed/recorded correctly.