Panasonic WJ-GXE500 Operating Instructions Manual

Also see for WJ-GXE500: Product catalog Integration note Product catalog Installation guide Installation guide

Contents

Panasonic WJ-GXE500 Operating Instructions Manual Manual pdf 50 page image

50[User mng.] page[User auth.] tabRefer to page 29 for general information about this tab.Setup items Setting values (Underlined: default)User auth. *1 On/OffUser name (Default: None (blank))Password *2 (Default: None (blank))Retype password (Default: None (blank))Access level *3 1. Administrator/2. Camera control/3. Live onlyUser check *4 (Example: admin [1])*1 • When user authentication (authentication error) has failed to pass 8 times within 30 seconds using thesame IP address (PC), access to the unit will be denied for a while.*2 • When the user name already in use is entered and the [Register] button is clicked, the respective userinformation will be overwritten.*3 • 1. Administrator: Allowed all available operations of the unit.2. Camera control: Allowed to display images from the camera and to control the camera. The unit settingconfiguration is unavailable.3. Live only: Only displaying live images is available. The unit setting configuration and camera control areunavailable.*4 • The registered users will be displayed in the drop-down list as follows: "User name [access level]"[Host auth.] tabRefer to page 29 for general information about this tab.Setup items Setting values (Underlined: default)Host auth. On/OffIP address *1 *2 (Default: None (blank))Access level 1. Administrator/2. Camera control/3. Live onlyHost check *3*1 • When "IP address/subnet mask" is entered, it is possible to restrict PCs in each subnet.For example, when "192.168.0.1/24" is entered and "2. Camera control" is selected for the access level,the PCs whose IP address is between "192.168.0.0" - "192.168.0.255" can access the unit with theaccess level "2. Camera control".*2 • When the IP address already in use is entered and the [Set] button is clicked, the respective host informa-tion will be overwritten.*3 • The registered hosts will be displayed in the drop-down list as follows: "Host name [access level]"(Example: 192.168.0.21 [1])