Panasonic WJ-HD220 Operating Instructions Manual

Also see for WJHD220 - DIGITAL DISK RECORDER: Reference Reference Specifications Brochure & specs Operating instructions

Contents

Panasonic WJ-HD220 Operating Instructions Manual Manual pdf 43 page image

431. Move the cursor to the desired camera using the [D] or[C] button.2. Select ON or OFF with the JogDial, and press theJogDial.The default is ON.ON: Live image of the channel is displayed.OFF: Blackout image is displayed.3. Repeat steps 1 and 2 until all channels are pro-grammed, or press the [SETUP/ESC] button to return tothe SWITCHER SETUP menu,Notes:• Recording will be carried out regardless of this set-ting.• The recorded images of the channel will be playedback and displayed on the monitor even if OFF isselected. Secret View Setup (SECRET VIEWSETUP)This will help to watch shoplifters without being recognizedin a store where, for example, cameras and spot monitorsare installed on the sales floors and a multiscreen monitor isinstalled in a control room. The spot monitor will black outits screen when the multi-screen monitor is switched to thesingle live mode to focus on the potential shoplifter.The default setting is OFF.ON: Enables the secret view function.OFF: Disables the secret view function. System Information(SYSTEM INFORMATION) HDD Hour Meter (HDD HOUR METER)The meter shows how many hours each hard disk has beenoperated in playback, recording and idle. The built-in HDDneeds replacement when the hour meter reads around30 000 H. HDD Capacity (HDD CAPACITY)The total usable capacity of the built-in hard disk is indicat-ed. Default (DEFAULT)This enables the recorder to restore all setup data to thedefault values.1. Press the JogDial to move the cursor to DEFAULT.2. When the cursor is on SET→, press the JogDial again.3. Select YES or NO with the JogDial, and press theJogDial.The default is NO.NO: Current setup data is retained.YES: Current setup data is reset to the default values.When all setup data are reset to the defaults, "SETDONE" is displayed for a few seconds and thenchanges to SET→.Note: The recorder will restart when the network setup hasbeen changed and the menu is closed. System Version (SYSTEM VERSION)This line displays the version number of the installed sys-tem software. You will need the version number whenupdating the software.SYSTEM INFORMATIONHDD1 HOUR METER 10000HHDD2 HOUR METER 10000HHDD CAPACITY XXX.XXGDEFAULT→ SET→SYSTEM VERSION X.XXSYSTEM LOGO