Panasonic WJ-HD220 Operating Instructions Manual

Also see for WJHD220 - DIGITAL DISK RECORDER: Reference Reference Specifications Brochure & specs Operating instructions

Contents

Panasonic WJ-HD220 Operating Instructions Manual Manual pdf 50 page image

50RecordingNotes:• When SIMUL REC&PLAY (simultaneous recording andplayback) is set to OFF in the setup, any recording willstop playback and start the recording. Playback isunavailable while recording.• When set to ON, recording is available while playingback.• The recording rate will degrade to 15 FPS while display-ing a quad split screen. Internal Timer RecordingWhen INT is set for TIMER in the WJ-HD220 MAIN menu,the presets made in the internal timer will take effect.Internal timer recording begins when the preset start timecomes and continues until the preset end time comes. Upto four programs, containing four events each, can beassigned to the weekly and/or daily schedule.Notes:• When SIMUL REC&PLAY is set to OFF, a preset record-ing interrupts playback and starts at the preset starttime.• When you set both the start and end time of an event tothe same hour, the event will not be recorded.• When planning to record all day long, set the start timeto 00:00 and the end time to 24:00 for the final event.• When planning to record through midnight:Set 24:00 for the end time of the final event of the day.Set 00:00 for the start time of the initial event of the nextday.4. To return to the all-channel list, press the button of theselected channel (now lit) or the [MULTISCREENSELECT] button. To Search for Playback1. Move the cursor to the desired event in the list, usingthe [D] or [C] button.2. Press the [PLAY] button to play back the recorded pic-ture. The LED in the [PLAY] button lights up. The alarmlog on the monitor disappears.3. Press the [STOP] button to stop playback. The alarmlog appears again on the monitor.4. Hold down the JogDial for 2 seconds to quit the alarmlog search. To Erase LogAll event records can be erased.1. Move the cursor to "PUSH → DATA CLEAR", then pressthe JogDial.2. Rotate the JogDial to select YES or NO.YES: Enables the log erasure.NO: Disables the log erasure.3. Press the JogDial to carry out the selection.Note: You can access pictures recorded on the disk bytime & date search even after they have beenerased.PROG1 SETUPNO. START END MODE1→ 8:00 12:20 SETO2→ 13:00 15:00 SETO3→ : :4→ : :